CARRIER-PLANETARY 4E1709 - Caterpillar

Illustration 1 g00871471 (1) Nut
Tighten the nut to the following torque: Torque ... 40 N m (30 lb ft)
Tighten the nut again to the following rotation: Rotation for nut ... 285 degrees 15 degrees (2) Bolt Torque ... 23 N m (17 lb ft) (3) End play ... 0.304 0.050 mm (0.0120 0.0020 inch) (4) Clutch plate New thickness ... 15.875 0.127 mm (0.6250 0.0050 inch) (5) Bolt Torque ... 94 N m (70 lb ft) (6) Bolt Torque ... 23 N m (17 lb ft) (7) Bolt Torque ... 190 N m (140 lb ft)Note: Once the clutch has been installed on the engine, hit the output shaft sharply on the end. This will relieve any preload due to the resistance of the pilot bearing that is being pressed into the flywheel.Clutch Engagement Check On The EngineA torque of 770 to 1020 N m (568 to 752 lb ft) on the splined clutch shaft is required in order to engage the clutch.