CARRIER AS 5S0978 - Caterpillar

Rotation is counterclockwise when seen from the drive gear.(1) Clearance between the gear and the cover ... 0.112 to 0.26 mm (.0044 to .0010 in)(2) Clearance between the gear and the manifold ... 0.082 to 0.021 mm (.0032 to .0008 in)(3) Torque for the plug ... 25 3 N m (18 2 lb ft)(4) Torque for the nut ... 170 20 N m (125 15 lb ft)(5) Diameter of the shaft (new) ... 31.742 0.010 mm (1.2497 .0004 in)(6) Bore of the manifold bearings (new) ... 31.786 0.008 mm (1.2514 .0003 in)(7) Put rubber washer between bolt head and steel washer four places.Bench test with SAE 10 W oil at 49°C (120°F).(8) Scavenge Section (output) ... 129 liter/min (34 U.S. gpm) minimumWith pump at ... 1800 rpmAt a pressure of ... 138 kPa (20 psi)(9) Transmission Section (output) ... 105 liter/min (28 U.S. gpm) minimumWith pump at ... 1800 rpmAt a pressure of ... 2068 kPa (300 psi)