CARRIER 6C0740 - Caterpillar

From the "Diagnostics" dialog, press "UTS".The "Diagnostics - UTS " dialog appears.The first "Diagnostics - UTS" screen is the "Machine Target" screen. This is the screen that appears if you press the "Machine Target" soft key. The fields in this screen are explained below.
Table 6
Field    Explanation    
Northing Easting Elevation     The computed location of the target, in terms of northing, easting and elevation.    
Slope distance Horizontal angle Vertical angle     The observed location of the target relative to the UTS, in terms of slope distance, horizontal angle and vertical angle.    
Tracking status     UTS tracking status. Refer to Table 7.    
Search window     The position of the target relative to the search window specified during UTS set up.    
Prism constant     The specified prism constant for the target.    The UTS instrument reports its tracking status to the system. UTS tracking status messages are listed in Table 7.
Table 7
UTS Tracking Status messages    
Tracking Status     Meaning    
N/A     No data being received from the instrument.    
No signal     No target is being tracked.    
Tracking     A target is being tracked.    
Illustration 15 g01421882
From any screen in the "Diagnostics - UTS" dialog, press "UTS".The "UTS" screen appears.This screen displays the name of the point at which the UTS insturment was set up, if the point has a name, in the form "UTS <name>". For example, "UTS South". The fields within this screen are explained below.
Table 8
Field    Explanation    
Northing
Easting
Elevation     The known or measured setup location of the UTS, in terms of northing, easting and elevation    
Compensator     The compensator status    
Scale factor     The scale factor    
Inst. height     The setup height of the instrument    
Illustration 16 g01421883
From any screen in the "Diagnostics - UTS" dialog, press "Backsight".The "UTS Backsight" screen appears. Refer to Illustration 16.The "UTS Backsight" screen displays information about the backsight. This information is taken in order to establish the orientation of the UTS instrument. The fields within this screen are explained in Table 9.
Table 9
Field    Explanation    
Northing
Easting
Elevation     The known location of the control point used for the backsight, in terms of northing, easting and elevation    
Slope Distance
Horizontal Angle
Vertical Angles     The observed location of the control point relative to the UTS, in terms of slope distance and horizontal angle    
Tracking Status     UTS tracking status. Refer to Table 10.    
Search Window     The position of the target relative to the search window specified during UTS set up.    
Prism Constant     The specified prism constant for the target.    The UTS instrument reports its tracking status to the system. UTS tracking status message are listed in Table 10.
Table 10
Tracking Status    Meaning    
N/A     No data being received from the instrument.    
No signal     No target is being tracked.    
Tracking     A target is being tracked.    
From any screen in the "Diagnostics - UTS" dialog, press "UTS". The "UTS" screen