CARRIER A. 7B1137 - Caterpillar

Illustration 1 g01520019The engine lockout control allows the engine to be disabled while service is performed. Use the engine lockout control to prevent accidental activation of the following:
The engine starter
The secondary steering
The prelube function (if equipped)
Illustration 2 g01520028
Park the machine on a level surface and stop the engine. Make sure that the transmission control is in the PARK position.
Chock the wheels on the machine.
Open door (3) in order to access the engine lockout switch.
Move switch (2) upward in order to activate the engine lockout mode. When the switch is activated, one of the following results will occur:
Illustration 3 g01513693
Indicator light (4) is located inside the cab on the dash panel.
Indicator lights (1) and (4) will illuminate continuously. This will indicate that the machine is in the engine lockout mode.
The indicator lights will flash in order to indicate that the engine lockout mode is not fully active. If the indicator lights are flashing, confirm that the transmission control is in the PARK position and confirm that the engine start switch is in the OFF position. If the indicator lights continue to flash, consult your Caterpillar dealer.
Move the engine lockout switch downward in order to deactivate the engine lockout mode.