CARRIER 7T5293 - Caterpillar

Direction Selector
Note: If the machine is equipped with a transmission direction control switch, both the transmission lever and the transmission switch must be in the NEUTRAL position before putting the machine into FORWARD or REVERSE. When you are using one of the controls, you cannot use the other control until both the transmission lever and the transmission switch are in NEUTRAL.Transmission and Direction Control Lever
Illustration 1 g00100769
The transmission direction control lever is located on the steering console.
FORWARD (1) - Move the transmission lever upward. The machine will move forward.
NEUTRAL (2) - The machine should not move when the transmission lever and the transmission switch (if equipped) are in neutral.
REVERSE (3) - Move the transmission lever downward. The machine will move in reverse. Transmission Direction Control Switch (If Equipped)
Illustration 2 g00448753
The transmission direction control switch (if equipped) is located on the single lever control.
Illustration 3 g00460411
FORWARD (1) - Move the transmission switch (if equipped) upward. The machine will move forward.
Illustration 4 g00460412
NEUTRAL (2) - The machine should not move when the transmission lever and the transmission switch (if equipped) are in neutral.
Illustration 5 g00460413
REVERSE (3) - Move the transmission switch (if equipped) downward. The machine will move in reverse. Speed Selector
Illustration 6 g00100786
Rotate the transmission lever to the desired gear speed:"1" - First Speed "2" - Second Speed "3" - Third Speed "4" - Fourth Speed