CARRIER-RING 8P5056 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
B 1U-9200 Lever Puller Hoist 1
C 1P-2420 Transmission Repair Stand 2
Illustration 1 g01447727
Illustration 2 g01447725
Slightly raise torque converter (1) to Install transfer gears (4).
Install torque converter (1). The weight of torque converter (1) is approximately 532 kg (1173 lb). Place torque converter (1) onto Tooling (B) (not shown).
Illustration 3 g01447723
Install bolts (3).
Illustration 4 g01447720
Install bolts (2).
Illustration 5 g01447719
Attach Tooling (A) to torque converter assembly (1).
Illustration 6 g01435372
Illustration 7 g01435343
Attach Tooling (A) and a suitable lifting device to torque converter assembly (2). Attach Tooling (B) to torque converter assembly (2). The weight of torque converter assembly (2) is approximately 1108 kg (2440 lb).
Remove torque converter assembly (1) from Tooling (C).
Rotate torque converter assembly (2) and place torque converter assembly (2) on the ground.
Remove Tooling (A), Tooling (B), and the suitable lifting devices.End By:
Connect the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Connect".