1883242 CART GP-FILTER Caterpillar parts
Rating:
Alternative (cross code) number:
CA1883242
188-3242
1883242
CA1883242
188-3242
1883242
Weight: 480 pounds 217 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$421.20
17 Nov 2023
2.2046[0.99] pounds
LU: Amazon Global S
Phoenix Contact PCB Connector 7.5mm Pitch 12 Poles Green 1883242
Phoenix Phoenix ZEC 1.5/12-ST-7.5 C2 R1.12. Product colour: Green || Material: Polyamide || Connector contacts plating: Tin. Weight: 22.71 g || Width: 98.9 mm || Depth: 24.1 mm. Quantity per pack: 1 pc(s)
Phoenix Phoenix ZEC 1.5/12-ST-7.5 C2 R1.12. Product colour: Green || Material: Polyamide || Connector contacts plating: Tin. Weight: 22.71 g || Width: 98.9 mm || Depth: 24.1 mm. Quantity per pack: 1 pc(s)
This part in 5 request:
Show.
This information for suppliers only!
2024-01-08
2021-12-14
2021-12-14
2021-08-23
2021-07-26
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8312 Retaining Ring Pliers 1
B 439-3940 Link Bracket 3 Start By:
Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal mechanism.
Illustration 1 g01341980
Use Tooling (A) in order to remove retaining rings (1). Remove retaining rings (1).
Illustration 2 g01341984
Attach Tooling (B) and a suitable lifting device onto carrier (2). The weight of carrier (2) is approximately 422 kg (930 lb).
Place carrier (2) into a suitable press.
Press planetary shaft (3) from the carrier.
Slide planetary gear (4) out of carrier (2) onto a suitable support. The weight of planetary gear (4) is approximately 75 kg (165 lb).
Illustration 3 g01341985
Remove spacers (5). Remove bearing assemblies (6) from planetary gear (4).
Repeat Steps 4 through 6 for the remaining planetary gears.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8312 Retaining Ring Pliers 1
B 439-3940 Link Bracket 3 Start By:
Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal mechanism.
Illustration 1 g01341980
Use Tooling (A) in order to remove retaining rings (1). Remove retaining rings (1).
Illustration 2 g01341984
Attach Tooling (B) and a suitable lifting device onto carrier (2). The weight of carrier (2) is approximately 422 kg (930 lb).
Place carrier (2) into a suitable press.
Press planetary shaft (3) from the carrier.
Slide planetary gear (4) out of carrier (2) onto a suitable support. The weight of planetary gear (4) is approximately 75 kg (165 lb).
Illustration 3 g01341985
Remove spacers (5). Remove bearing assemblies (6) from planetary gear (4).
Repeat Steps 4 through 6 for the remaining planetary gears.
Parts cart Caterpillar catalog:
1839301
CART
Caterpillar
Caterpillar
Caterpillar
1705664
CART-
Caterpillar
Caterpillar
1508756
CART-
Caterpillar
Caterpillar
1489610
CART-PC
Caterpillar
Caterpillar
1278782
CART GP-
Caterpillar
Caterpillar
2047392
CART GP-
Caterpillar
Caterpillar
2018131
CART GP-FILTER
Caterpillar
Caterpillar
1U8320
CART-ENG STAND
Caterpillar
Caterpillar
Caterpillar
1G5285
CART KIT
Caterpillar
Caterpillar
1942897
CART GP-FILTER
Caterpillar
Caterpillar