CARTRIDGE AS 0549012 - Caterpillar

Illustration 10 g01076766
Position spring (59). Install bolts (58), cotter pin (56), and pin (57) that secures spring (59). Install bolt (61) and the clip that secures tube assembly (51). Connect tube assembly (42) onto adapter (62). Install bolt (60) onto tube assembly (42) .
Illustration 11 g01076765
Connect hose assembly (53) onto load cylinder (52). Connect hose assembly (55) onto load cylinder (52) and install bolts (54) .
Illustration 12 g01076763
Connect hose assembly (50) onto tube assembly (51). Connect hose assembly (49). Install bolt (46) and the clip that secures hose assembly (49). Install clamp (45) and bolts (44). Connect hose assemblies (48) onto tube assemblies (43). Connect hose assembly (47) onto tube assembly (42) .
Illustration 13 g00534679
Connect harness assembly (40). Install harness assembly (40) onto clip (41) .
Illustration 14 g01076761
Position bracket (35) and install bolts (34). Connect tube assemblies (36) onto hose assemblies (37). Position clamp (38) and the harness assembly. Install bolt (39) .
Illustration 15 g00534481
Position the wiring harness and clips (33). Install bolt (32) .
Illustration 16 g01076758
Position hose assemblies (31). Position clamps (30) and install bolts (29). Repeat the procedure for the other side.
Illustration 17 g01076755
Connect hose assembly (27) onto tube assembly (28). Install bolts (24) that secure junction block (26). Install bolts (23) that secure tube assembly (11). Install bolt (25) and the clamp that secures hose assemblies (22). Install bolt (20) and the clip that secures tube assembly (21) .
Illustration 18 g01076752
Connect hose assemblies (19) onto the lubrication manifold. Install bolt (17) (not shown) and clamps (18). Install clamp (16) .
Illustration 19 g01076748
Connect hose assemblies (15) onto tube assemblies (14) .
Illustration 20 g01076746
Connect hose assembly (12) onto tube assembly (13) .
Illustration 21 g01076486
Position brackets (8) and (2). Install bolts (9). Connect hose assembly (10) onto tube assembly (11) .
Illustration 22 g01076484
Position harness assembly (6) onto bracket (2). Install clamp (5) and bolt (7). Position hose assemblies (4) onto bracket (2). Install clamps (3) and bolts (1) .End By:
Install the servo steering cylinder. Refer to Disassembly and Assembly, "Servo Steering Cylinder - Remove and Install".
Connect the tractor and the scraper. Refer to Disassembly and Assembly, "Tractor and Scraper - Connect".
Install the cushion-hitch accumulator. Refer to Disassembly and Assembly, "Accumulator (Cushion-Hitch) - Install".
Install the air cleaner. Refer to the Engine Supplement Disassembly and Assembly, "Air Cleaner - Remove and Install".