CARTRIDGE GP 0R1484 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00847023
Install gear (8), washer (9), nut (10), and O-ring seal (7) .
Illustration 2 g00847021
Install unit injector hydraulic pump (5). The weight of unit injector hydraulic pump (5) is approximately 14 kg (30 lb).
Illustration 3 g00847020
Install bolts (6) .
Illustration 4 g00847019
Install hose assembly (3) and tube assemblies (4) on unit injector hydraulic pump (5). Connect electrical connector (2) .
Illustration 5 g00847017
Install tube assembly (1) .