CARTRIDGE GP 0R1492 - Caterpillar

Cat Alarm and Protection System Control Panel
Note: The Cat Alarm and Protection System is package-mounted for shipment. During final installation, the Cat Alarm and Protection System must be remote-mounted by the customer to maintain approval by the MCS (Marine Classification Society). Films for the package-mounted system lifting eyes with instructions on removing and lifting the system will be provided.Note: During standard maintenance activities (normal startup), ensure that the Emergency Shutdown override switch is in the OFF position. After the completion of the maintenance activity, place the Emergency Shutdown override switch in the On position.Reference: See Special Instruction, REHS7334, "Cat Alarm and Protection (A&P) Control Panel" for more information.
Illustration 1 g06113009
Cat Alarm and Protection Control Panel
(1) Direct control unit panel (DCU)
(2) "AUX 1 POWER" lamp
(3) "AUX 2 POWER" lamp
(4) "COMMON SHUTDOWN" lamp
(5) "GENERAL ALARM" lamp
(6) "EMERGENCY" switch
(7) "SPEED CONTROL" switch
(8) "GOVERNOR CONTROL" switch
(9) "ENGINE CONTROL" switch
Illustration 2 g03733239
Switches on the inside panel of the control panel
(1) "LOCAL THROTTLE" switch
(2) "CRANK MTR SEL" switch
(3) "CRANK OVRD" switch
(4) "MANUAL RUN/STOP" switch
(5) "LOW IDLE SEL" switch
(6) "ENG PRTN OVRD" switch is factory-set to the ON position.
(7) "RAPID START/STOP" switch
(8) "MANUAL PRELUBE" switch
(9) "LIGHT TEST" switch
(10) "OIL MIST OVRD" switch
Illustration 3 g06113018
DCU 410E Panel
(1) Digital Control Unit (DCU 410E)
(2) "Menu" button
(3) "Up" button
(4) "Down" button
(5) "Soft" buttons (varying functionality)
(6) "Alarm List" button
(7) "Start" button
(8) "Stop" button