CARTRIDGE GP -A 0R6346 - Caterpillar

Attach Tooling (D) and a suitable lifting device to impeller assembly (8) in order to reposition impeller assembly (8) . The weight of impeller assembly (8) is approximately 32 kg (70 lb).
Illustration 8 g00964246
Use Tooling (E) to remove retaining ring (10) .
Illustration 9 g00964248
Remove stator (11) .Note: For torque converters with a two piece stator refer to steps 11 and 12. For torque converters with a one piece stator, disregard steps 11 and 12.
Illustration 10 g00964250
Remove retaining rings (12) from both sides of stator (11) .
Illustration 11 g00964252
Use Tooling (F) and a suitable press to remove adapter (13) from stator (11) .
Illustration 12 g00964586
Use Tooling (E) to remove retaining ring (14) . Remove spacer (15) from carrier assembly (4) .
Illustration 13 g00964254
Use a suitable press to remove carrier assembly (4) from impeller assembly (8) .
Illustration 14 g00964258
Remove ring (16) from carrier assembly (4) .
Illustration 15 g00964259
Remove bolts (17) and pump drive gear (18) from impeller (19) .
Illustration 16 g00964261
Use Tooling (G) and a suitable press to remove bearing (20) from impeller (19) .
Illustration 17 g00964264
Remove retaining ring (21) and cover (22) from housing (9) .
Illustration 18 g00964266
Use Tooling (E) to remove retaining ring (24) from housing (9) . Remove spacer (25) and O-ring seal (23) from housing (9) .
Illustration 19 g00964268
Remove ring (27) . Use a suitable press to remove hub assembly (26) from housing (9) .
Illustration 20 g00964273
Use Tooling (G) and a suitable press to remove bearing (28) (not shown) from housing (9) .
Illustration 21 g00964280
Remove bolts (29) from turbine (30) . Remove hub (31) .