CARTRIDGE GP -A 0R6952 - Caterpillar

2. Disconnect water temperature line (1). Remove clips (2). 3. Disconnect tube assemblies (3) and (4). 4. Disconnect rod (5). Disconnect the rod for the decelerator linkage.5. Disconnect wiring harness (6). 6. Disconnect air conditioner compressor clutch wire (7) in the dash if so equipped.7. Disconnect the torque converter oil temperature sending unit from the torque converter outlet relief valve. 8. Disconnect two rods (8) at the dash for the steering clutch controls.9. Disconnect two rods (9) at the dash for the brakes. 10. Install two 3/8"-16 NC forged eyebolts in the top of the dash as shown. Fasten a hoist to the dash. 11. If the machine is equipped with a cab, remove tooling (10) that is used to hold the dash in position when the cab is tilted back. The dash can then be removed. If the machine does not have a cab, remove the bolts and bushings that hold the dash in position. Remove dash (11). The weight of the dash is 90 kg (200 lb). Install in reverse order.12. Fill the cooling system with coolant to the correct level. See Operation And Maintenance Manual.End By: (for machines with a cab)a. tilt cab forwardEnd By: (for machines without a cab)a. install Roll-Over Protective Structure