CARTRIDGE A 1032977 - Caterpillar

Illustration 1 g03369718
(1) Camera
(2) Camera mounting bolts
Perform the automation system preparation for troubleshooting procedure before entering the operations area. Reference: Refer to Troubleshooting, Testing, and Adjusting, "Automation System Preparation for Troubleshooting".Reference: Refer to Operation and Maintenance Manual, "Machine Isolating for Maintenance".
Insert the battery disconnect switch key and move the battery disconnect switch to the ON position.
Move the remote/autonomous control switch to the ON position.
Move the autonomous control enable switch to the AUTO position. The machine is now in the autonomous mode.
Loosen camera mounting bolts (2), permitting movement of the camera body.
At the operator station, review the camera angle. Continue to move camera (1) until the desired view is obtained.
Tighten camera mounting bolts (2). To aid in adjustment of camera in real time:
Use communication with operator station
Use a laptop or notebook computer with the machine diagnostics page openNote: Camera views in the machine diagnostics page are not live. Refresh the web page after making each adjustment.
Move the remote/autonomous control switch to the OFF position.
Move the battery disconnect switch to the OFF position.