CARTRIDGE GP -A 10R0920 - Caterpillar

Introduction
Winch speeds may be changed by ordering and installing the appropriate parts. The winch speed can be changed from standard to low speed, or from low to standard speed. This publication will give the part numbers required. It will also show the locations of the parts in the winch. Order the parts for making the conversion by ordering the individual parts shown in the charts in the topic entitled Necessary Parts. Any new gaskets and seals provided should be installed. Do not reuse the originals. The shim packs may or may not be needed.Do not perform any procedure, outlined in this publication, or order any parts until you read and understand the information contained within.Reference: Towing Winches Service Manual, Operation & Maintenance Manual.Necessary Parts
Converting the Powershift Standard to Direct Drive Standard
Converting the Powershift Standard to Power Shift and Direct Drive Low Speed
Converting Power Shift and Direct Drive Low Speed to Powershift Standard
Changing the Gears
1. Drain the oil from the winch.2. Remove the winch from the machine.
Location of components.3. Remove and replace the parts located in the illustration. See the Towing Winches Service Manual for disassembly and assembly instructions.4. Stamp the appropriate data on the serial number plate in the area labeled modifications. Update the standard or low speed indication.5. Reinstall the winch. Add the correct type and quantity of oil to the winch sump. Refer to the Operation & Maintenance Manual.