CARTRIDGE GP -A 10R8862 - Caterpillar

(1) Assemble shaft even with the back of the bracket. Make an adjustment if necessary for track alignment.(2) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Seals must be assembled square with the bore and toric must not be bulged or twisted. Put lubrication on all other seals at assembly.(3) Assemble the ground face of the plate to the end of shaft and bearing.(4) Torque for bolts (two) ... 47 9 N m (35 7 lb ft)(5) Put lubricant on the inside of the collar assembly before installation.(6) Torque for plug ... 170 20 N m (125 15 lb ft)