CARTRIDGE GP -A 10R9747 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7574     Link Brackets     2    
B     8C-8422     Sealant     -    Start By:
Remove the flywheel.
Remove the crankshaft rear seal.
Illustration 1 g02175589
If necessary, remove fuel filter base (1) and reposition fuel filter base (1). Remove bracket (2) .
Illustration 2 g01870417
If necessary, remove oil filter base (3) and reposition oil filter base (3). Remove bracket (4) .
Illustration 3 g01870418
Install Tooling (A) and a suitable lifting device to flywheel housing (6). The weight of flywheel housing (6) is approximately 64 kg (140 lb). Remove bolts (5) and flywheel housing (6) .Installation Procedure
Install flywheel housing (6) in the reverse order of removal.
Apply Tooling (B) to the backside of flywheel housing (6). Install within 10 minutes of application.