CARTRIDGE ASSEM. 1382923 - Caterpillar

Remove the plug from port "M4" (29) on the section of the propel pump away from the engine. Install Tool (F) in port "M4" (29). Tighten Tool (F) to a torque of 12 N m (9 lb ft).
Illustration 19 g03124256
Remove the plug from port "M5" (30) on the section of the propel pump away from the engine. Install other Tool (F) in port "M5" (30). Tighten Tool (F) to a torque of 12 N m (9 lb ft).
Connect one end of Tool (G) to Tool (F) in port "M4" (29). Connect other end of Tool (G) to Tool (F) in port "M5" (30).
Illustration 20 g03124257
Connect one Tool (D) to port "Mc" (31) on the section of the propel pump away from the engine. Connect Tool (B) to Tool (D). Connect Tool (A) to Tool (B).
Illustration 21 g03124258
Connect other Tool (D) to port "Md" (32) on the bottom of the propel pump section away from the engine. Connect Tool (B) to Tool (D). Connect Tool (A) to Tool (B).
Move engine start switch (4) to the START position. Release the switch when the engine starts.
Use throttle control switch (3) in order to operate the engine