CARTRIDGE GP-TURBOCHARGER 1412023 - Caterpillar

Engine: D336 (S/N: 55B1-UP; 60B1-UP) D342C (S/N: 50B1-UP) D343 (S/N: 62B1-UP) G342 (S/N: 71B1-UP) 3306 (S/N: 67D1-UP; 68D1-UP) 3304 (S/N: 05B1-UP)Industrial Engine: D342C IND (S/N: 49B1-UP; 31B1-UP; 32B1-UP)Pipelayer: 571A (S/N: 64A1-UP) 583K (S/N: 78V1-UP) 583H (S/N: 61A1-UP)Track-Type Tractor: D8H (S/N: 46A1-UP) D8K (S/N: 76V1-UP; 77V1-UP)Introduction
The information in this Special Instruction will guide you in the replacement of service meters for the machines that are listed above.The following service meters have been discontinued. The 285-9075 Service Meter Gp replaces the meters that are listed in Table 1.
Table 1
Old Service Meters    
Part Number    Description    
5S-9086     Service Meter Gp    
8S-0105     Service Meter Gp    
9M-3720     Service Meter Gp    
8H-6124     Service Meter Gp    
8S-0107     Service Meter Gp    
8S-0106     Service Meter Gp    
2S-0421     Service Meter Gp    
2S-0423     Service Meter Gp    
3S-3579     Service Meter Gp    
2A-5319     Meter Counter As    
4F-8128     Meter Counter As    
9M-4948     Meter Counter As    
8H-6020     Meter Counter As    
6L-4420     Service Meter Gp    
8H-5262     Meter Counter As    
3S-7229     Service Meter Gp    
7L-4856     Service Meter Gp    
6L-2963     Meter Counter As    
4S-7893     Service Meter Gp    
2S-0425     Service Meter Gp    
3S-3581     Service Meter Gp    
2S-0422     Service Meter Gp    
8H-5255     Meter Counter As    
5S-9494     Meter Counter As    
6L-2965     Service Meter Gp    
4M-1243     Meter Counter As    
7L-4855     Service Meter Gp    
2S-0403     Housing As    
9M-2381     Service Meter Window Kit    
9S-9348     Service Meter Gp    There are four options for installation that are available. Use one of the following options when the engine is equipped with an electrical system:
Alternator terminal "R"
Oil pressure switch
Key start switchIf the engine does not have an electrical system, use a magnetic pickup in the flywheel housing.Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not specifically recommended by Caterpillar is used, you must ensure