1P5466 CARTRIDGE GROUP Caterpillar parts
D342C, D379, G3306, G3306B, G353D, G379, G398
Rating:
Alternative (cross code) number:
CA1P5466
1P-5466
1P5466
CA1P5466
1P-5466
1P5466
Weight: 28 pounds 12 kg.
GAS ENGINE, INDUSTRIAL ENGINE,
Related part:
1P5466
CARTRIDGE GP -A
0R5861
R
Compatible equipment models: 1P5466:
Number on catalog scheme:
6
For full view, you need register
Information:
The following illustrations show typical features of the EMCP 4.4 SCP.Front Panel
Illustration 1 g03888059
(1) Control panel display
(2) Customer connection
(3) Panel screwsControl panel display (1) - The control panel display is used for monitoring and controlling many of the generator system set functions. Refer to Operations and Maintenance Manual, "Control Panel" for more information.Customer connection (2) - The customer connection is a 9-pin connector on the panel. This connection is used with a computer that has Cat ET software loaded on the computer.Panel screws (3) - Four panel screws are used to keep the front cover secure. Turn each screw counter-clockwise a quarter turn to open panel.Electrical Connections
The EMCP 4.4 SCP has a 120-pin connection on the back of the control. An extra 70-pin connection is also on the back of the control.Note: Not all the 120-pin and 70-pin connections are used.Illustrations 2 and 3 shows the following information.
All possible connections
What pins are used for connections
How each pin is connected for the EMCP 4.4 SCP
Illustration 2 g03889272
EMCP 4.4 SCP 120-pin connection electrical diagram
Illustration 3 g03889274
EMCP 4.4 SCP 70-pin connection electrical diagram
Illustration 1 g03888059
(1) Control panel display
(2) Customer connection
(3) Panel screwsControl panel display (1) - The control panel display is used for monitoring and controlling many of the generator system set functions. Refer to Operations and Maintenance Manual, "Control Panel" for more information.Customer connection (2) - The customer connection is a 9-pin connector on the panel. This connection is used with a computer that has Cat ET software loaded on the computer.Panel screws (3) - Four panel screws are used to keep the front cover secure. Turn each screw counter-clockwise a quarter turn to open panel.Electrical Connections
The EMCP 4.4 SCP has a 120-pin connection on the back of the control. An extra 70-pin connection is also on the back of the control.Note: Not all the 120-pin and 70-pin connections are used.Illustrations 2 and 3 shows the following information.
All possible connections
What pins are used for connections
How each pin is connected for the EMCP 4.4 SCP
Illustration 2 g03889272
EMCP 4.4 SCP 120-pin connection electrical diagram
Illustration 3 g03889274
EMCP 4.4 SCP 70-pin connection electrical diagram
Caterpillar parts catalog:
Parts cartridge Caterpillar catalog:
7N8546
CARTRIDGE GP-TURBOCHARGER
D379, D379B, D399
D379, D379B, D399
D342C, D353C, D379, D379A, D398, D398A, G342C, G353D, G379
1P4400
CARTRIDGE ASSEM.
D379, D379A
D379, D379A
4N3957
CARTRIDGE ASSEM.
D379, D379A
D379, D379A
3S4008
CARTRIDGE ASSEM.
1673, 1673B, D333A, D333B, D353C, G353D
1673, 1673B, D333A, D333B, D353C, G353D
1S2496
CARTRIDGE ASSEM.
977H, D342, D342C
977H, D342, D342C
D379, D379A
D342C, D8H
9F0739
CARTRIDGE
631C, 977D, D342, D342C, D364
631C, 977D, D342, D342C, D364
1S2500
CARTRIDGE ASSEM.
D353C, D379A, D398A, G342C, G353D, G379
D353C, D379A, D398A, G342C, G353D, G379
6N5541
CARTRIDGE GP
D379, D379B
D379, D379B
D342C, D8H
D379, D379A
1693, 3406, 631C, 657B, 666, 769, 777, 824B, 826B, 983, 992, D348, D9G, D9H
3S7804
CARTRIDGE ASSEM.
D343, D8H
D343, D8H
3S8444
CARTRIDGE ASSEM.
657, D343, D9E, D9G
657, D343, D9E, D9G
572G, 583K, 7271, 772, 773