2022079 CARTRIDGE Caterpillar parts
PF-300C, PS-300B, TH103
Rating:
Alternative (cross code) number:
CA2022079
202-2079
2022079
CA2022079
202-2079
2022079
Weight: 0.24 pounds 0 kg.
PNEUMATIC COMPACTOR, TELEHANDLER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ECCPP AC Compressor Fast Cooling Fit for Jeep Liberty for Dodge Nitro 3.7L 2009 2010 2011 2012 Air Conditioning Compressor
ECCPP BEST FEATURE: air conditioner compressors are designed and manufactured to meet or exceed the standards of the original equipment components we are replacing. Each compressor is loaded with lubricating oil to prevent rust of compressors' internal parts, oxidization, and ensure proper lubrication (please ask professional mechanics to measure appropriate oil requirements for your specific A/C system) || NOISELESS AC COMPRESSOR PUMP PART NUMBER: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,,140478NC,C2693,C1755 || STRONG COOLING AIR CONDITIONING COMPRESSOR FITMENT: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L, Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm): 140, Compressor Type: RS18, Internal Oil Content: 130 ml || Tips: Before installing the air conditioning compressor, clean your car's cooling system pipes and check that the fan and condenser are working properly so as not to affect the use of new parts || INCLUDED: AC compressor with clutch. AC compressor and Clutch with the oil that was needed. All compressors are pressure tested with nitrogen for leaks to ensure their quality
ECCPP BEST FEATURE: air conditioner compressors are designed and manufactured to meet or exceed the standards of the original equipment components we are replacing. Each compressor is loaded with lubricating oil to prevent rust of compressors' internal parts, oxidization, and ensure proper lubrication (please ask professional mechanics to measure appropriate oil requirements for your specific A/C system) || NOISELESS AC COMPRESSOR PUMP PART NUMBER: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,,140478NC,C2693,C1755 || STRONG COOLING AIR CONDITIONING COMPRESSOR FITMENT: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L, Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm): 140, Compressor Type: RS18, Internal Oil Content: 130 ml || Tips: Before installing the air conditioning compressor, clean your car's cooling system pipes and check that the fan and condenser are working properly so as not to affect the use of new parts || INCLUDED: AC compressor with clutch. AC compressor and Clutch with the oil that was needed. All compressors are pressure tested with nitrogen for leaks to ensure their quality
INEEDUP AC Compressor and A/C Clutch for 2009-2012 Fit for Dodge Nitro 3.7L
Ineedup Common Faults: The common reason about an A/C compressor to fail is leaky seals and inadequate lubrication. It is good practice to turn the AC on periodically so that the seals don't dry up and stay lubricated. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), get it inspected || Air Conditioning Compressor Suitable Model: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L. Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm) 140, Compressor type: RS18, Internal Oil Content 130 ml || Air Conditioner Compressor Reference Part Number: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,140478NC,C2693,C1755,ADP10417DA101S || Offering the reliability, quality and durability of a/c compressor with clutch || AC Compressor Pump Get Parts That Fit: To ensure you find the parts that fit your vehicle, choose your results by entering your Year, Make, Model into "YOUR GARAGE', which in the upper-right corner
Ineedup Common Faults: The common reason about an A/C compressor to fail is leaky seals and inadequate lubrication. It is good practice to turn the AC on periodically so that the seals don't dry up and stay lubricated. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), get it inspected || Air Conditioning Compressor Suitable Model: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L. Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm) 140, Compressor type: RS18, Internal Oil Content 130 ml || Air Conditioner Compressor Reference Part Number: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,140478NC,C2693,C1755,ADP10417DA101S || Offering the reliability, quality and durability of a/c compressor with clutch || AC Compressor Pump Get Parts That Fit: To ensure you find the parts that fit your vehicle, choose your results by entering your Year, Make, Model into "YOUR GARAGE', which in the upper-right corner
INEEDUP AC Compressor with A/C Clutch for 2009-2013 Fit for Jeep Liberty 3.7L Fast Cooling
Ineedup Common Faults: The common reason about an A/C compressor to fail is leaky seals and inadequate lubrication. It is good practice to turn the AC on periodically so that the seals don't dry up and stay lubricated. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), get it inspected || Suitable Model: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L. Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm) 140, Compressor type: RS18, Internal Oil Content 130 ml || Reference Part Number: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,140478NC,C2693,C1755 || Offering the reliability, quality and durability of a/c compressor with clutch || Get Parts That Fit: To ensure you find the parts that fit your vehicle, choose your results by entering your Year, Make, Model into "YOUR GARAGE', which in the upper-right corner
Ineedup Common Faults: The common reason about an A/C compressor to fail is leaky seals and inadequate lubrication. It is good practice to turn the AC on periodically so that the seals don't dry up and stay lubricated. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), get it inspected || Suitable Model: 2009-2012 Fit for Dodge Nitro 3.7L,2009-2013 Fit for Jeep Liberty 3.7L. Oil Type: PAG46, Pulley Grooves:6, Pulley Diameter (mm) 140, Compressor type: RS18, Internal Oil Content 130 ml || Reference Part Number: 55111506AA,55111506AB,55111506AC,RL111506AB,98301,7512877,2022079,140478NC,C2693,C1755 || Offering the reliability, quality and durability of a/c compressor with clutch || Get Parts That Fit: To ensure you find the parts that fit your vehicle, choose your results by entering your Year, Make, Model into "YOUR GARAGE', which in the upper-right corner
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 2022079:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2730 Hook 12
B 8T-2998 Lubricant - Start By:
Remove the rocker arm and the shaft.
Remove the front cover.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Use Tooling (A) to reposition the valve lifters out of the way of the camshaft.
Set the No. 1 piston to top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01032348
Ensure that the timing marks on camshaft gear (1) and idler gear (2) are aligned.
Remove bolts (3) and thrust plate (4) from the cylinder block.
Illustration 2 g01032349
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Remove camshaft (5) from the cylinder block.Installation Procedure
Install camshaft (5) in the reverse order of removal.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Note: During the installation of the camshaft, rotate the camshaft in both directions in order to prevent binding in the camshaft bearing bores.
Lubricate the camshaft lobes and the valve lifter bore with a 50/50 mixture of Tooling (B). Apply clean engine oil on the camshaft bearing journals. Carefully install camshaft (5) in the cylinder block.
When installing the camshaft, make sure the number one cylinder is at top center of the compression stroke with the timing bolt installed in the flywheel. The camshaft timing is very important. The timing mark on the camshaft drive gear must line up with the timing mark on the idler gear. Refer to the Specifications Manual for more information.
Ensure that the timing marks on the camshaft gear (1) and idler gear (2) are aligned.
The maximum permissible end play for a worn camshaft is 0.46 mm (0.018 inch). The maximum permissible end play for a new camshaft is 0.13 0.08 mm (0.005 0.003 inch).
Use Tooling (A) to position the valve lifters in the cylinder block.
Calibrate the speed/timing sensor. Refer to Troubleshooting, "Engine Speed/Timing Sensor - Calibrate".
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2730 Hook 12
B 8T-2998 Lubricant - Start By:
Remove the rocker arm and the shaft.
Remove the front cover.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Use Tooling (A) to reposition the valve lifters out of the way of the camshaft.
Set the No. 1 piston to top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01032348
Ensure that the timing marks on camshaft gear (1) and idler gear (2) are aligned.
Remove bolts (3) and thrust plate (4) from the cylinder block.
Illustration 2 g01032349
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Remove camshaft (5) from the cylinder block.Installation Procedure
Install camshaft (5) in the reverse order of removal.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Note: During the installation of the camshaft, rotate the camshaft in both directions in order to prevent binding in the camshaft bearing bores.
Lubricate the camshaft lobes and the valve lifter bore with a 50/50 mixture of Tooling (B). Apply clean engine oil on the camshaft bearing journals. Carefully install camshaft (5) in the cylinder block.
When installing the camshaft, make sure the number one cylinder is at top center of the compression stroke with the timing bolt installed in the flywheel. The camshaft timing is very important. The timing mark on the camshaft drive gear must line up with the timing mark on the idler gear. Refer to the Specifications Manual for more information.
Ensure that the timing marks on the camshaft gear (1) and idler gear (2) are aligned.
The maximum permissible end play for a worn camshaft is 0.46 mm (0.018 inch). The maximum permissible end play for a new camshaft is 0.13 0.08 mm (0.005 0.003 inch).
Use Tooling (A) to position the valve lifters in the cylinder block.
Calibrate the speed/timing sensor. Refer to Troubleshooting, "Engine Speed/Timing Sensor - Calibrate".
Caterpillar parts catalog:
Parts cartridge Caterpillar catalog:
6I4203
CARTRIDGE GP-TURBOCHARGER
3054, AP-800C, BG-225B, CB-534B, CB-534C, CB-535B, CP-433C, CS-431C, PS-200B, PS-300B, TH103, TH62, TH63, TH82, TH83
3054, AP-800C, BG-225B, CB-534B, CB-534C, CB-535B, CP-433C, CS-431C, PS-200B, PS-300B, TH103, TH62, TH63, TH82, TH83
3054, 3054B, 312C, AP-800C, BG-225B, CB-534C, CB-535B, CP-433C, CS-431C, CS-433C, PF-290B, PS-200B, PS-300B, PS-360B, TH103, TH62, TH63, TH82, TH83
1247367
CARTRIDGE
PF-300C, PS-300B
PF-300C, PS-300B
1247368
CARTRIDGE
PF-300C, PS-300B
PF-300C, PS-300B
1219443
CARTRIDGE AS
428B
428B
1072066
CARTRIDGE AS
416B, 424D, 426C, 428B, 428C, 428D, 432D, 436C, 438C, 438D, 442D, 572R, 797, 797B, 902, 906, D10R, D11R, D5M, D6M, D6R, D7R
416B, 424D, 426C, 428B, 428C, 428D, 432D, 436C, 438C, 438D, 442D, 572R, 797, 797B, 902, 906, D10R, D11R, D5M, D6M, D6R, D7R
3054, 3054B, 312C, AP-800C, BG-225B, CB-534C, CB-535B, CP-433C, CS-431C, CS-433C, PF-290B, PS-200B, PS-300B, PS-360B, TH103, TH62, TH63, TH82, TH83
9T4892
CARTRIDGE-RELIEF
65, 65C, 75, 75C, 85C
65, 65C, 75, 75C, 85C
8T8807
CARTRIDGE AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA, 227, 35, 45, 55, AD40, AE40, D11R, D9R, IT28F, IT38F, IT38G, R1300, R1600, R1...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA, 227, 35, 45, 55, AD40, AE40, D11R, D9R, IT28F, IT38F, IT38G, R1300, R1600, R1...
1138896
CARTRIDGE-RELIEF
35, 45, 55
35, 45, 55
120G, 12G, 130G, 140G, 307, 312, 315, 317, 330 L, 350, 350 L, 375, 426B, 426C, 436C, 438C, 515, 525, 69D, 769D, 771D, 773D, 775D, 793C, 844, 950F II, 950G, 953C, 960F, 962G, 966F II, 966G, 970F, 972G,...
1303271
CARTRIDGE AS
426B, 426C, 436C, 438C, 438D, 442D
426B, 426C, 436C, 438C, 438D, 442D
1318631
CARTRIDGE AS
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C
1795592
CARTRIDGE AS-VALVE
416D, 424D, 428C, 428D, 438C, 438D, 924G
416D, 424D, 428C, 428D, 438C, 438D, 924G
216, 228, 236, 248, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 446B, 446D, 533, 543, 908, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
3054, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 432D, 554, 908, BG-225C, M312, M315