2071358 CARTRIDGE GP-TURBOCHARGER Caterpillar parts
3516C
Rating:
Alternative (cross code) number:
CA2071358
207-1358
2071358
CA2071358
207-1358
2071358
Weight: 35 pounds 15 kg.
GENERATOR SET,
Related part:
2071358
CARTRIDG GP -A
10R5422
R
Compatible equipment models: 2071358:
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00627517
Remove six bolts (2) and guard (1) .
Illustration 2 g00627521
Remove seven bolts (3) and guard (4) .
Illustration 3 g00627523
Remove four bolts (7) and two straps (6). Disconnect winch drive shaft (5) .
Illustration 4 g00627526
Remove pin (8) .
Remove yoke (9) .
Remove jam nut (10) and cable (11) from the bracket.
Illustration 5 g00627534
Disconnect hydraulic hose (12) .
Illustration 6 g00627557
Disconnect tube (13) .
Illustration 7 g00627563
Attach a hoist and a suitable lifting sling to winch (15) .
Remove two bolts (14) from the mount on the rear of the winch.
Remove the two front bolts (hidden) through the access holes that are located in the bottom of the frame.
Remove the winch. The weight of the winch is 630 kg (1400 lb).
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00627517
Remove six bolts (2) and guard (1) .
Illustration 2 g00627521
Remove seven bolts (3) and guard (4) .
Illustration 3 g00627523
Remove four bolts (7) and two straps (6). Disconnect winch drive shaft (5) .
Illustration 4 g00627526
Remove pin (8) .
Remove yoke (9) .
Remove jam nut (10) and cable (11) from the bracket.
Illustration 5 g00627534
Disconnect hydraulic hose (12) .
Illustration 6 g00627557
Disconnect tube (13) .
Illustration 7 g00627563
Attach a hoist and a suitable lifting sling to winch (15) .
Remove two bolts (14) from the mount on the rear of the winch.
Remove the two front bolts (hidden) through the access holes that are located in the bottom of the frame.
Remove the winch. The weight of the winch is 630 kg (1400 lb).
Caterpillar SIS machinery equipment:
Caterpillar SIS
3516C Generator Set LYM00001-UP »
207-1358
CARTRIDGE GP-TURBOCHARGER
3516C Generator Set GBZ00001-UP »
207-1358
CARTRIDGE GP-TURBOCHARGER
3516C Generator Set SBK00001-UP »
207-1358
CARTRIDGE GP-TURBOCHARGER
3516C Generator Set JDH00001-UP »
207-1358
CARTRIDGE GP-TURBOCHARGER
3516C Generator Set SEK00001-UP »
207-1358
CARTRIDGE GP-TURBOCHARGER
Caterpillar parts catalog:
Parts cartridge Caterpillar catalog:
3516C, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, C175-16
24M, C18, C27, C32, CX35-P800, PM-201
777F, C27, C32
777F, C18, C32, CX35-P800, PM-200
3266172
CARTRIDGE GP-TURBOCHARGER
Caterpillar
Caterpillar
3200331
CARTRIDGE GP-TURBOCHARGER
Caterpillar
Caterpillar
3435701
CARTRIDGE GP-TURBOCHARGER
C175-16, C175-20
C175-16, C175-20