CARTRIDGE GP-TURBOCHARGER 2762924 - Caterpillar

Illustration 1 g01016848
(A) Discharge port (S) Suction port (T1) Case drain port (T2) Case drain port (G) External pilot pressure port (M1) Actuator pressure gauge port (M) Discharge gauge port (R) Drain port
Illustration 2 g01016850
View B-B (1) Torque for four bolts ... 430 30 N m (317 22 lb ft) (2) Pressure and Flow Compensator ValveNote: Refer to the Specifications, "Pressure and Flow Compensator Valve (Fan Drive)". (3) Head Pump
Illustration 3 g01016851
View C-C
Illustration 4 g01016852
(4) Torque for plug ... 65 1 N m (48 1 lb ft) (5) Torque for orifice ... 65 1 N m (48 1 lb ft)
Illustration 5 g01016860
Section D-D (6) Pump Rotating GroupNote: Refer to the Specifications, "Pump Rotating Group (Fan Drive)". (7) 117-5920 Spring Free length after test ... 86.4 mm (3.40 inch) Outside diameter ... 28.6 mm (1.13 inch) (8) 117-5926 Spring Free length after test ... 62.0 mm (2.44 inch) Outside diameter ... 20.2 mm (0.80 inch)Rotation of the pump is counterclockwise when the pump is viewed from the drive end.Bench test requirements: SAE 10W oil must be stabilized at 65 °C (149 °F) before the test is performed.Pressure cutoff at zero flow ... 27000 345 kPa (3916 50 psi)Test at Full Speed Output ... 227 L/min (60 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of the pump ... 1800 Test speed of the engine ... 1800 Output ... 225 L/min (59.5 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of the pump ... 1800 Test speed of the engine ... 1800Test at Half Speed Output ... 113 L/min (29.9 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of the pump ... 900 Test speed of the engine ... 900 Output ... 112 L/min (29.6 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of the pump ... 900 Test speed of the engine ... 900