CARTRIDGE GP-TURBOCHARGER 2796060 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00537495
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
Install oil drain tube (7) on the engine. Position the gasket and turbocharger (5) on top of the exhaust manifold and install four bolts (6) and the nuts.
Illustration 2 g00537468
Install the gasket and two bolts (3) that hold the oil drain tube to the turbocharger. Put the oil supply tube in position and install the gasket and two bolts (1) that hold the oil supply tube to the turbocharger. Tighten nut (4) .
On the 3304B, slide the hose into position on the turbocharger and the pipe that goes to the cylinder head. Tighten the hose clamp.
Install the clamp that holds the oil supply tube and the oil drain tube in position and install bolt (2) .