CARTRIDGE GP-TURBOCHARGER 3555172 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
ZZ     6V-9508     Face Seal Plug (11/16 - 16 THD)     44    
6V-9829 Cap Assembly (11/16 - 16 THD)     44    
6V-9509 Face Seal Plug (13/16 - 16 THD)     6    
6V-9830 Cap Assembly (13/16 - 16 THD)     6    Start By:
Remove the screed. Refer to Disassembly and Assembly, "Screed - Remove and Install".Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Illustration 1 g00796878
Remove bolts (2) and adjuster assembly (1) .
Illustration 2 g00796879
Disconnect harness assembly (4) .
Remove clamp (5) from deflector (6) .
Disconnect hose assemblies (3) .
Illustration 3 g00796882
Disconnect hose assemblies (7) from deflector (6) .
Illustration 4 g00796883
Open conduit (8) and pull back the hose assemblies and harness assembly.
Illustration 5 g00796884
Remove bolts (9) and conduit (8) from deflector (6) .
Illustration 6 g00796886
Attach a suitable lifting device to deflector (6). Remove bolts (10) and remove the deflector. The weight of the deflector for the AS-2251 Screed is approximately 152 kg (335 lb). The weight of the deflector for the AS-2251 Screed is approximately 165 kg (364 lb).
Repeat Steps 1 through 8 in order to remove the other deflector.