CARTRIDGE GP 3G2834 - Caterpillar

Applying the Load
While the engine is operating at full load, check that the gauges are in the normal range. Always increase the engine speed to the rated speed before applying the load.
Adjust the voltage and the frequency.
Close the main circuit breaker.
Apply the load. Begin operating the engine at low load. Check the gauges and the equipment for proper operation. After normal oil pressure is reached and the temperature gauge begins to move, the engine may be operated at full load. Adjust the voltage and the frequency in order to compensate for the load, if necessary. The governor will adjust the engine speed if the load varies, or if the load is cyclic, as required.Extended operation at low idle or extended operation at a reduced load may cause increased oil consumption and carbon buildup in the cylinders. Carbon buildup in the cylinders can result in loss of power and/or poor performance. When the engine is operated at a reduced load, operate the engine at a full load in order to remove carbon buildup from the cylinders. Operate the engine at a full load at every four hours. Check the gauges and check the equipment frequently while the engine is under a load.