CARTRIDGE GP-FRONT 3G7653 - Caterpillar

(1) Tighten the bolts that hold adapter assembly (2) to the engine to a torque of ... 115 15 N m (85 11 lb.ft.)(2) Adapter assembly.(3) Torque for hub nut ... 40 N m (30 lb.ft.) plus 60° to 90° more Bend lock against flat of nut to hold nut in position.(4) Torque for bolt that holds the lock in place ... 26 N m (21 lb.ft.) Torque for the bolt that holds the clutch lever on the shaft ... 100 N m (75 lb.ft.)A force of 555 N (125 lb.) must be necessary to engage the clutch. The force must be at 90° to the clutch lever and 345 mm (13.6 in.) from the center of the clutch shaft.(5) End clearance for shaft ... 0.10 to 0.18 mm (.004 to .007 in.)(6) Thickness of clutch plate (new) ... 11.00 to 11.25 mm (.433 to .443 in.)(7) Torque for two bolts that hold the yoke to the shaft ... 51 N m (38 lb.ft.)(8) Torque for two bolts that hold the collar assembly together ... 40 N m (30 lb.ft.)5N3334 Double Plate Clutch
Torque for the bolt that holds the clutch lever on the shaft ... 100 N m (75 lb.ft.)A force (F), 90° to the clutch lever, of 725 N (163 lb.) at a distance of 541 mm (21.3 in.) from the center of the clutch shaft must be necessary to engage the clutch.(1) Torque for hub nut ... 40 N m (30 lb.ft.) + 150 to 180°(2) Torque for bolt that holds the lock in place ... 26 N m (21 lb.ft.)(3) End clearance for shaft ... 0.15 to 0.25 mm (.006 to .010 in.)(4) Thickness of clutch plate (new) ... 15.75 to 16.00 mm (.620 to .630 in.)(5) Torque for two bolts that hold the collar assembly together ... 40 N m (30 lb.ft.)(6) Torque for two bolts that hold the yoke to the shaft ... 51 N m (38 lb.ft.)(7) Torque for carrier assembly bolts ... 115 N m (85 lb.ft.)2W4908 Triple Plate Clutch
Torque for the bolt that holds the clutch lever on the shaft ... 100 N m (75 lb.ft.)Clutch engagement force, measured on splined shaft ... 390 N m (290 lb.ft.)(1) Torque for hub nut ... 40 N m (30 lb.ft.) + 180 to 210°(2) End clearance for shaft ... 0.15 to 0.25 mm (.006 to .010 in.)(3) Thickness of clutch plate (new) ... 15.75 to 16.00 mm (.620 to .630 in.)(4) Torque for two bolts that hold the collar assembly together ... 40 N m (30 lb.ft.)(5) Torque for two bolts that hold the yoke to the shaft ... 51 N m (38 lb.ft.)(6) Torque for retainer bolts ... 51 N m (38 lb.ft.)(7) Torque for carrier assembly bolts ... 190 N m (140 lb.ft.)