CARTRIDGE- 5309437 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Film (Product Identification) - Clean
Screed - Check/Adjust
Every 10 Service Hours or Daily
Screed - Clean
Tamper Blade - Clean
Every 50 Service Hours
Eccentric Weight Housing Oil Level - Check
Screed - Lubricate
Tamper Drive Shaft - Lubricate
Every 250 Service Hours
Toggle Switch - Inspect
Every 500 Service Hours or 3 Months
Eccentric Weight Housing Oil - Change
Tamper Blade - Check
Tamper Blade - Check/Clean/Lubricate