CARTRIDGE 5372164 - Caterpillar

If the machine has one of the serial numbers below, refer to Table 2.
ABJ566-597
AGN615-770
AEC682-822
AFG525-528
ADW525-531
ACS590-620
BRP700,708-711,713-UP
BNM516-UP
BRN520-UP
BNX702,704-UP
BPT515-UP
BPK513-UP
Table 2
Running Changes Versus Current Production    
Part Name    Old Part Number    New Part Number    
Alternator Pulley     235-6388     245-3702    
Banded V-Belt Set     198-6750     251-7496 (1)    
Banded V-Belt Set     236-4189     252-9028 (2)    
V-Belt Set     7M-4720     251-7493 (3)    
V-Belt Set     233-6316     251-7495 (4)    
Alternator (100 Amp)     204-7449     197-8820 (5)    
Engine Software     -     244-2283 Engine Ratings Electronic Software
(6)    
( 1 ) Use this belt set with the 8 blade Flexxaire fan and the ejector fan.
( 2 ) Part is used on the 12 blade Flexxaire fan.
( 3 ) Use this belt for the Standard fan speed and for the Reversible fan.
( 4 ) Use with the Fan Speed Increse arrangement
( 5 ) Part is required to provide low idle charging capabilities in applications with high debris. See Service Magazine, SEPD0756, "An Improved Alternator for Applications with Debris is Now Available".
( 6 ) Part is required to provide low idle charging capabilities. See Service Magazine, SEPD0763, "New Software is Now Used to Ensure Charging at Low Speed".Parts that are used on current production are shown in the column of New Part Numbers. A new alternator pulley is now used. The machine may be equipped with a standard alternator or a sealed alternator. Either alternator will provide adequate low idle charging with the new alternator pulley. The machine may be equipped with a Shielded 204-7449 Alternator. The shielded alternator must be exchanged for a 197-8820 Alternator Gp in order to ensure battery charging at low speed. Refer to the Service Magazine, SEPD0756, "An Improved Alternator for Applications With Debris is Now Available" for this procedure. The machine may also be equipped with a 200-8277 Alternator Gp. You must change to a 197-8820 Alternator Gp in order to ensure battery charging at low speed. Refer to the Service Magazine, SEPD0653, "A New Alternator Has Greater Durability" for this procedure. A new alternator bracket is used. Both the new alternator bracket and the old alternator bracket have the same part number. The new version has the engineering change (5) on the bracket. New software will enable elevated idle of 1100 rpm. See Service Magazine, SEPD0763, "New Software is Now Used to Ensure Charging at Low Engine Speed".In cases of near acceptable belt life, it may be advisable to try all the current parts except the new crankshaft pulley. If the machine is equipped with banded belts, using the new crankshaft pulley and all other current parts is required.