7E4821 CARTRIDGE GP-TURBOCHARGER Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA7E4821
7E-4821
7E4821
CA7E4821
7E-4821
7E4821
Weight: 6 pounds 2 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
Related part:
7E4821
CARTRIDGE GP -A
0R6898
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7E4821 Turbocharger Cartridge Group for Model 3116
CTP For model 3116 || Better performance and higher durability || Ready to ship
CTP For model 3116 || Better performance and higher durability || Ready to ship
CTP 7E4821 Turbocharger Cartridge Group for Model 3116
CTP For model 3116 || Better performance and higher durability || Ready to ship
CTP For model 3116 || Better performance and higher durability || Ready to ship
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 7E4821:
Information:
Remove Fuel Pump Drive Gear And Automatic Timing Advance
start by: a) remove timing gear cover 1. Turn the crankshaft until the "C" mark on crankshaft gear (2) is in alignment with the "C" mark on camshaft gear (1).2. Put a mark on the idler gear and on the fuel pump drive gear at location (X). Put a mark on the idler gear and on the camshaft gear at location (Y). This procedure is necessary to make sure the timing of the engine is correct when the fuel pump drive gear is installed. 3. Remove bolt (3) and washer (4). 4. Install bolt (3) to the position shown. Use tooling (A) to loosen the pump drive gear from the camshaft. Remove the bolt and washer. Remove the fuel pump drive gear and automatic timing advance as a unit.Install Fuel Pump Drive Gear And Automatic Timing Advance
1. Install the fuel pump drive gear and automatic timing advance as a unit. Make sure the mark on the fuel pump drive gear is in alignment with the mark on the idler gear.2. Install the spacer and bolt. With the timing pin in the groove (slot) of the fuel injection pump camshaft, tighten the bolt to a torque of 110 5 lb.ft. (149 7 N m).end by: a) install timing gear cover
start by: a) remove timing gear cover 1. Turn the crankshaft until the "C" mark on crankshaft gear (2) is in alignment with the "C" mark on camshaft gear (1).2. Put a mark on the idler gear and on the fuel pump drive gear at location (X). Put a mark on the idler gear and on the camshaft gear at location (Y). This procedure is necessary to make sure the timing of the engine is correct when the fuel pump drive gear is installed. 3. Remove bolt (3) and washer (4). 4. Install bolt (3) to the position shown. Use tooling (A) to loosen the pump drive gear from the camshaft. Remove the bolt and washer. Remove the fuel pump drive gear and automatic timing advance as a unit.Install Fuel Pump Drive Gear And Automatic Timing Advance
1. Install the fuel pump drive gear and automatic timing advance as a unit. Make sure the mark on the fuel pump drive gear is in alignment with the mark on the idler gear.2. Install the spacer and bolt. With the timing pin in the groove (slot) of the fuel injection pump camshaft, tighten the bolt to a torque of 110 5 lb.ft. (149 7 N m).end by: a) install timing gear cover
Caterpillar parts catalog:
Parts cartridge Caterpillar catalog:
3116, 3126
16G, 245, 3406, 3406B, 3408, 983B
1444644
CARTRIDGE AS
30/30, AD30, D250E, D250E II, D300E, D300E II, D350E, D350E II, D400E, DEUCE
30/30, AD30, D250E, D250E II, D300E, D300E II, D350E, D350E II, D400E, DEUCE
1078611
CARTRIDGE AS
24H, 30/30, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 735, 740, 769D, 770, 771D, 772, 773D, 773E, 775D, 775E, 776D, 777D, 784B, 784C, 785B, 785C, 785D...
24H, 30/30, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 735, 740, 769D, 770, 771D, 772, 773D, 773E, 775D, 775E, 776D, 777D, 784B, 784C, 785B, 785C, 785D...
30/30, 3116, DEUCE
3176, 3176B, 3176C, R1600, R1700 II, R1700G