7J5567 CARTRIDGE ASSEM Caterpillar parts
772
Rating:
Alternative (cross code) number:
CA7J5567
7J-5567
7J5567
CA7J5567
7J-5567
7J5567
Weight: 13 pounds 6 kg.
TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
HpaErtsP 7J5567 7J-5567 30 Gallon Cartridge Earthmover for Caterpillar CAT(7J5567)
HpaErtsP This is an aftermarket part manufactured to replace the 7J5567 7J-5567 and its OEM counterparts. || Durable construction: Built to withstand heavy use and harsh environments. || Precision Engineering: Designed to meet Caterpillar's exacting specifications for optimal performance. || Easy to install: Direct replacement for worn or damaged pump element (installation guide included). || Warranty: Backed by manufacturer's warranty for added peace of mind (warranty details included in package).
HpaErtsP This is an aftermarket part manufactured to replace the 7J5567 7J-5567 and its OEM counterparts. || Durable construction: Built to withstand heavy use and harsh environments. || Precision Engineering: Designed to meet Caterpillar's exacting specifications for optimal performance. || Easy to install: Direct replacement for worn or damaged pump element (installation guide included). || Warranty: Backed by manufacturer's warranty for added peace of mind (warranty details included in package).
$194.58
24 Feb 2020
-: -
CATERPILLAR / CAT 7J5567 7J-5567 CARTRIDGE KIT (CART KIT)
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 7J5567:
Information:
Assembly Procedure
Table 1
Required Tools
Tooling Part Number Description Qty
A 1P-0510 Driver Gp 1
B 1P-1855 Retaining Ring Pliers 1
C 1P-1857 Retaining Ring Pliers 1
D 7M-7456 Bearing Mount Compound 1
E 5P-3413 Pipe Sealant 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00995360
Apply a thin coat of Tooling (D) to the outside diameter of lip seal (1). Use Tooling (A) in order to install lip seal (1) in body (2). Install lip seal (1) even with the bottom of the bearing bore with the lip of the seal toward the bearings. Apply a small layer of engine oil on the lip of the seal.
Illustration 2 g00995361
Place slinger (3) in position above lip seal (1).
Illustration 3 g00995362Note: Only use clean water as a lubricant for assembly. Do not damage the silicone carbide ring or the silicone carbide seal assembly. Do not place your hands on the wear surfaces of the silicone carbide ring or the silicone carbide seal assembly.
Place carbide ring (4) in position in the rubber seal. Install the silicone carbide ring with the smoothest face of the ring toward the silicone carbide ring. Use a clean cover for protection while you install the silicone carbide ring. Install the silicone carbide ring evenly with hand pressure.
Illustration 4 g00995363
Use Tooling (B) in order to install snap ring (5) on shaft (6).
Illustration 5 g00995364
Raise bearings (7) and (9) to a maximum temperature of 135 °C (275 °F).
Install bearing (9) on shaft (6) against snap ring (5).
Install spacer (8) and bearing (7). Ensure that bearing (7) is in full contact with the spacer. Note: Ensure that slinger (3) is in the correct position on shaft (6) when you install shaft (6) in body (2).Note: Apply a piece of tape to both ends of the shaft in order to protect the seals from damage during the assembly procedure.
Illustration 6 g00995366
Install shaft (6) and the bearings in body (2) through slinger (3).
Illustration 7 g00995372
Use Tooling (C) in order to install snap ring (10) that holds the shaft assembly in place.
Illustration 8 g00995374
Install key (12) in the shaft.
Place spacer (11) in position over shaft (6).
Illustration 9 g00995375
Install gear (13), the washer, and the locknut. Tighten the locknut to a torque of 60 7 N m (45 5 lb ft).
Illustration 10 g00995378Note:
Table 1
Required Tools
Tooling Part Number Description Qty
A 1P-0510 Driver Gp 1
B 1P-1855 Retaining Ring Pliers 1
C 1P-1857 Retaining Ring Pliers 1
D 7M-7456 Bearing Mount Compound 1
E 5P-3413 Pipe Sealant 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00995360
Apply a thin coat of Tooling (D) to the outside diameter of lip seal (1). Use Tooling (A) in order to install lip seal (1) in body (2). Install lip seal (1) even with the bottom of the bearing bore with the lip of the seal toward the bearings. Apply a small layer of engine oil on the lip of the seal.
Illustration 2 g00995361
Place slinger (3) in position above lip seal (1).
Illustration 3 g00995362Note: Only use clean water as a lubricant for assembly. Do not damage the silicone carbide ring or the silicone carbide seal assembly. Do not place your hands on the wear surfaces of the silicone carbide ring or the silicone carbide seal assembly.
Place carbide ring (4) in position in the rubber seal. Install the silicone carbide ring with the smoothest face of the ring toward the silicone carbide ring. Use a clean cover for protection while you install the silicone carbide ring. Install the silicone carbide ring evenly with hand pressure.
Illustration 4 g00995363
Use Tooling (B) in order to install snap ring (5) on shaft (6).
Illustration 5 g00995364
Raise bearings (7) and (9) to a maximum temperature of 135 °C (275 °F).
Install bearing (9) on shaft (6) against snap ring (5).
Install spacer (8) and bearing (7). Ensure that bearing (7) is in full contact with the spacer. Note: Ensure that slinger (3) is in the correct position on shaft (6) when you install shaft (6) in body (2).Note: Apply a piece of tape to both ends of the shaft in order to protect the seals from damage during the assembly procedure.
Illustration 6 g00995366
Install shaft (6) and the bearings in body (2) through slinger (3).
Illustration 7 g00995372
Use Tooling (C) in order to install snap ring (10) that holds the shaft assembly in place.
Illustration 8 g00995374
Install key (12) in the shaft.
Place spacer (11) in position over shaft (6).
Illustration 9 g00995375
Install gear (13), the washer, and the locknut. Tighten the locknut to a torque of 60 7 N m (45 5 lb ft).
Illustration 10 g00995378Note:
Caterpillar parts catalog:
Parts cartridge Caterpillar catalog:
769, 814, 814S, 815
3622308
CARTRIDGE GP-TURBOCHARGER
773G, 773G OEM, 775G, 775G OEM
773G, 773G OEM, 775G, 775G OEM
3542298
CARTRIDGE AS
777G, 785D
777G, 785D
4421362
CARTRIDGE GP-TURBOCHARGER
795F AC, 795F XQ
795F AC, 795F XQ
2U1458
CARTRIDGE, EACH INCLUDING:
D25C, D30C, D350C, D35C, D35HP, D400
D25C, D30C, D350C, D35C, D35HP, D400
7U6410
CARTRIDGE-RELIEF V. (2nd TYPE)
D250B, D25C, D25D, D300B, D300D, D30C, D350C, D35C, D35HP, D400, D40D
D250B, D25C, D25D, D300B, D300D, D30C, D350C, D35C, D35HP, D400, D40D
2U0962
CARTRIDGE-RELIEF V. 1st TYPE)
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, D44B, D550B
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, D44B, D550B
4U6163
CARTRIDGE - RELIEF VALVE
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400
D250B, D300B