CASE 1366549 - Caterpillar

Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Lifting the machine
For Lifting the machine, please refer to the Operation and Maintenance Manual of the OEM (Original Equipment Manufacturer) in which this CAT PCM (Partial Complete Machine) is incorporated.Tying Down the Machine
Note: Obey all local and regional governmental regulations.Diagonal Lashing
Illustration 1 g03844781
(A) Front of the machine
(B) Rear of the machine Tying Down the Machine
Tie Down Point - In order to tie down the machine, attach the tie-downs to the tie down points.The weight and the instructions that are given herein describe the machine as the machine is manufactured by Caterpillar.Refer to the Operation and Maintenance, "Specifications" for specific weight information.
Use proper rated cables and shackles for tying down the machine.
Use corner protectors for sharp corners.
Move the hydraulic lockout control to the LOCKED position.
If there is a requirement of diagonal lashing for tying down, use the proper tie-down point Set the lashing angle which is on the longitudinal axis of the machine and the cable, at 30 to 50 degrees.