CASE-REAR TRANSMISSION 1569275 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Description     Qty    
A     9U-7540     Lift Stand     2    
277-7200 Electric Hydraulic Pump Gp     1    
B     183-4797     Roller Lifting Fork As     1    
Detension the track. Refer to Operation and Maintenance Manual, "Track - Check/Adjust".
Illustration 1 g01353050
Illustration 2 g01238797
Use Tooling (A) to raise one side of the machine.
Illustration 3 g01238826
Use Tooling (B) and a suitable lifting device to support track roller (2). The weight of track roller (2) is approximately 95 kg (209 lb). Remove bolts (3), caps (1), and track roller (2) .Installation Procedure
Install track roller (2) in the reverse order of removal.
Tighten bolt (3) on the abutment side first. Tighten bolts (3) to a torque of 1050 150 N m (775 110 lb ft).