CASE-TRANSFER 1885052 - Caterpillar

Illustration 1 g01318567
Press the "OK" key. If at least one device was detected on the CAN bus, a dialog that is similar to Illustration 1 will appear.This dialog lists all of the the correctly named ".s" files on the root folder of the data card or the internal memory of the display that are applicable for the type of machine that is selected. The version of each file is also shown.
Verify that the software versions that are displayed on the screen are the latest versions.
Check on the "Downloads" page of SIS for the latest software versions.
If newer versions of software are available on SIS, copy the software to the root directory of a data card.
Place the data card into the display.
Press the arrow keys in order to highlight the "AS400nnn.s" file or the "CR900nnn.s" file.
Press the "OK" key.The dialog displays the "current application" and "loader version" of the sensors.
Disconnect all components in the AccuGrade System.
Illustration 2 g01349219
Press the "OK" key. A dialog that is similar to Illustration 2 will appear.The firmware upgrade begins. A progress bar appears.Note: Do not remove the card or turn off the display during the firmware upgrade.When the upgrade is completed, a text message will appear. The text message will inform you if the upgrade was successful or failed.If the upgrade was successful, the "device version" is updated to reflect the change.If the upgrade is unsuccessful, you can retry the upgrade.