CASE & FRAME ASSEM. 2M9616 - Caterpillar

Fuel Level (13) - The fuel level gauge indicates the amount of fuel that remains in the fuel tank. A gauge needle in the red zone indicates a low fuel level.
Torque Converter Oil Temperature (14) - The gauge indicates the temperature of the oil in the torque converter. If the gauge needle enters the red zone the oil temperature is excessive. The Advisor Panel will display a warning. Increased temperatures will sound the warning alarm. If necessary, reduce the load that is on the machine until the torque converter oil temperature decreases.
Running out of fuel can cause engine damage. Do not continue to operate the machine when critically low on fuel.
Digital Display Window
Illustration 4 g02680464The digital display window (15) provides readouts that show the following items:
Operational hours (service hours)
Selected gear and direction
Engine Speed or Ground Speed Service Hour Meter - This display indicates the total operating hours of the engine. Use the display in order to determine the service hour maintenance intervals.Advisor Display
Illustration 5 g02680543Truck ID (16) - This button will activate the Truck ID selection screen. This button will light up while the Truck ID selection screen is active.Zero (17) - Zero/tare the payload system when prompted by the Advisor display, or when there is additional need to do so such as accumulation of material stuck in the bucket. This button will light up briefly when pressed to acknowledge selection.Clear (18) - This button allows the current bucket load to be excluded from payload memory. This button may be pressed multiple times to clear all bucket loads since the last time that the store button was depressed. The payload screen will update to reflect that the payload information has been cleared. This button will light up briefly when pressed to acknowledge selection.Reweigh (19) - This button allows the user to reweigh the current bucket load. This button will light up briefly when pressed to acknowledge selection.Delay (20) - This button will activate the Delay selection screen. This function may also be accessed by selecting "Delay" from the Payload main menu. This button will light up while a delay code is active (including auto-delay).Digital display area (21) - The Advisor system shows information on this digital display area.Scroll up/left (22) - This button is used to scroll up through information that is shown on the display area. The button can also be used to scroll to the left through information that is shown on the display area.Scroll down/right (23) - This button is used to scroll down through information that is shown on the display area. The button can also be used to scroll to the right through information that is shown on the display area.Previous (24) - Use this button to return to information that was previously shown on digital display area .Main menu (25) - Use this button to return to the main menu.OK (26) - After you have made selections with the scroll down/right button and with the scroll up/left button , use this button in order