CASE AS 2V3954 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9760     Jack Stand     2    
B     8T-0375     Forcing Bolts     4    
C     439-3938     Link Brackets     2    Start By:
Remove the front or rear axle.
Illustration 1 g01189069
Install Tooling (A) under the axle housing in order to prevent the axle from turning. Yoke (1) for the differential should be in an upright position.
Remove bolts (2) for differential housing (3) .
Illustration 2 g01189091
Install Tooling (B) in the threaded holes on differential housing (3) in order to loosen differential housing (3) from the axle housing.
Illustration 3 g01189095
Install Tooling (C) and a suitable lifting device to yoke (1). Raise the differential housing from the axle housing. The weight of differential housing (3) is approximately 250 kg (550 lb).
Remove Tooling (B) .