CASE & FRAME GP 4698741 - Caterpillar

Illustration 1 g00594880
(1) The dowels extend the following distance from the surface of the housing. ... 10.0 1.0 mm (0.40 0.04 inch) (2) The bearings are installed into the bore to the following depth. ... 2.0 0.5 mm (0.08 0.02 inch) (3) Bore in housing for gear shaft bearing ... 99.075 0.025 mm (3.9006 0.0010 inch) (4) Diameter of new gear shaft ... 88.90 0.02 mm (3.500 0.001 inch) (5) Thickness of thrust washer ... 9.77 0.05 mm (0.385 0.002 inch)Width of groove in the shaft ... 10.00 0.13 mm (0.394 0.005 inch) (6) Inside diameter of idler shaft pilot ... 120.00 0.05 mm (4.724 0.002 inch)Outside diameter of idler shaft ... 119.92 0.02 mm (4.721 0.001 inch) (7) Outside diameter of idler shaft at the bearing ... 88.90 0.02 mm (3.500 0.001 inch)Outside diameter of free drive gear bearing ... 99.245 0.020 mm (3.9073 0.0008 inch)Inside diameter of installed drive gear bearing ... 99.075 0.025 mm (3.9006 0.0010 inch) (8) Outside diameter of drive gear ... 123.00 0.02 mm (4.843 0.001 inch)Idler gear inside diameter ... 123.08 0.03 mm (4.846 0.001 inch)