CASE ASSEMBLY 7U3410 - Caterpillar

Illustration 1 g00739827
Illustration 2 g00773773There are several specific safety messages on this work tool. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiarized with all safety messages.Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the safety messages if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. Loose adhesive will allow the safety messages to fall. Replace any safety message that is damaged or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Cat dealer can provide new safety messages.Operation (1)This warning message is located on the right side of the broom.
Illustration 3 g01206071
Do not operate or work on this machine or work tool unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals and Owner's Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Entanglement and Flying Objects (2)These warning messages are located on the front of the cover. The messages are located on each side of the cover.
Illustration 4 g03057504
Stay clear of this work tool during operation. Entanglement could result in personal injury or death. Flying objects from this work tool could result in personal injury or death.
Entanglement (3)These warning messages are located on the front of the cover. The messages are located on each side of the cover.
Illustration 5 g00989893
No clearance for person in this area during operation. Severe injury or death from crushing could occur. Stay away from the work tool while it is in operation.
Crushing Hazard (4)These warning messages are located on the rear of the cover. The messages are located on each side of the cover.
Illustration 6 g01368398
No clearance for person in this area during operation. Severe injury or death from crushing could occur. Stay away from the work tool while it is in operation.