CASE-TRANSFER GEAR 8E6668 - Caterpillar

Removal Procedure
Start By:
Remove the water tank assembly. Refer to Disassembly and Assembly, "Water Tank - Remove and Install".
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Illustration 1 g03082616
Place water tank assembly (1) on a stable work area.
Remove the screws and plate (2) .
Illustration 2 g03082617
Remove brackets (5) and the bolts from water tank assembly (1) .
Remove brackets (3) and the bolts from fuel tank (4) .
Illustration 3 g03082618
Remove the bolts, fuel sending unit (6), and the gasket from fuel tank (4) .Installation Procedure
Illustration 4 g03082618
Install the gasket, fuel sending unit (6), and the bolts to fuel tank (4) .
Illustration 5 g03082617
Install the bolts and brackets (3) to fuel tank (4) .
Install the bolts and brackets (5) to water tank assembly (1) .
Illustration 6 g03082616
Install plate (2) and the screws to water tank assembly (1) .End By: Install the water tank assembly. Refer to Disassembly and Assembly, "Water Tank - Remove and Install".