CASE-FINAL DRIVE 9P0565 - Caterpillar

Illustration 1 g03328412
Table 1
Specification for the 378-7410 Auxiliary Water Pump Gp
Item Qty Part Specification Description
1 1 9X-4594 Lip Type Seal Do not lubricate the sealing lip of the lip type seal.
2 1 212-8183 Impeller Bore diameter of the impeller is 19.000 0.013 mm (0.7480 0.0005 inch).
Diameter in the shaft for impeller is 19.050 to 19.063 mm (0.7500 to 0.7505 inch).
3 1 212-8179 Shaft Lubricate the surface with a thin film of clean engine oil before pressing the impeller onto the drive shaft. The end of the drive shaft must be flush with the face of the impeller within 0.00 to 0.30 mm (0.000 to 0.012 inch).
4 2 5N-4383 Thrust Washer Thickness of the new thrust washer is 6.000 0.025 mm (0.2362 0.0010 inch).
5 1 127-5400 Bushing After assembly, bore in the bushing for auxiliary drive shaft is 75.000 0.055 mm (2.9528 0.0022 inch).
Installation depth of the bushing in the housing assembly is 1.5 0.5 mm (0.06 0.02 inch).
6 1 235-3546 O-Ring Seal Lightly, lubricate the bore with the fluid that is being sealed.
7 1 9M-3786 O-Ring Seal Lightly, lubricate the bore with engine oil, glycerin, or clean water.