CASING 0965896 - Caterpillar

Illustration 6 g01133155
Disconnect hose assemblies (10) and (11).
Illustration 7 g01133158
Disconnect hose assemblies (12) and (13).
Illustration 8 g01132815
Disconnect two hose assemblies (14).
Disconnect two hose assemblies (15).
Illustration 9 g01132816
Disconnect lubrication hose assembly (7).
Remove 12 bolts (17). Remove cover (16).
Illustration 10 g01132813
Remove lip seal (18) and O-ring seal (19) from cover (16).
Illustration 11 g01133188
Attach a suitable lifting device to rear frame assembly (20). The weight of the rear frame assembly is approximately 8450 kg (18629 lb).
Illustration 12 g01132811
Disconnect hose assemblies (23) to access bolts (21).
Loosen 12 bolts (21) that hold cover plate (22) to the rear frame.
Illustration 13 g01132810
Remove 12 bolts (24). Remove retainer (25) and the shims.
Illustration 14 g01133189
Install Tooling (B) and a suitable extension bar between the oscillating hitch and rear frame assembly (20), as shown.
Illustration 15 g01133190
Install Tooling (C) in order to support bearing cone (26). Attach a hoist and a suitable lifting device to bearing cone (26). Use Tooling (B) to separate the oscillating hitch and rear frame assembly (20).
Attach a suitable lifting device to bearing cone (26). Remove bearing cone (26). The weight of the bearing cone is approximately 40 kg (88 lb).
Remove 12 bolts (21) that were loosened in Step 17.
Illustration 16 g01132802
Remove rear frame assembly (20) from the oscillating hitch.
Illustration 17 g01133191
Remove bearing cups (27) and (28) from the rear frame.
Illustration 18 g01133192
Remove bearing cone (29).
Remove cover plate (22), 12 bolts (21) and spacer (30) (not shown).
Illustration 19 g01132793
Remove lip seal (31) and O-ring seal (32) from cover (22).
Illustration 20 g01132792
Remove O-ring seal (33) from spacer (30).