CASING 0990223 - Caterpillar

Accessing Configurations
Turn the battery disconnect switch and the key start switch to the ON position.
Connect the ET to the machine.
Choose the menu item "Transmission" for the machine that is being serviced.
Illustration 1 g01171885
Typical example
Select the "Configuration Group 1" .
A list of items will appear. From the list, select the desired item from the list.
Click on "Change". A pop up box that is called "Change Parameter Value" will appear.
Illustration 2 g01179245
Typical example
Enter the "New Value" required.
Table 1
Speed Parameters     "Machine Speed Limit"     "Underground Speed Limit"    
Minimum    
9 km/h (5.6 mph)    
9 km/h (5.6 mph)    
Maximum    
52 km/h (32.4 mph)    
52 km/h (32.4 mph)    
Default    
52 km/h (32.4 mph)    
20 km/h (12.5 mph)    Note: Setting "Machine lower Speed Limit" to zero will disable the machine underground speed limit.Note: If the "Machine Speed Limit" is set to, or below the "Machine Underground Speed Limit", the "Machine Underground Speed Limit" will default to zero. The machine lower speed limit will not function.
Select "OK".
Illustration 3 g01171892
Typical example
The selected value will appear in the "Value" column.