parts catalog

CHAIN AS. 2500557 - Caterpillar

2500557 CHAIN AS. Caterpillar parts CHAIN
Alternative (cross code) number:
Caterpillar 2500557 CHAIN AS.
Weight: 0.09 pounds 0 kg.

Buy CHAIN AS. 2500557 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 35 g06228571
(5) Move to the setting needing changed.
(6) Change to desired setting.
(7) Select the "Home" button.
(8) The setting is now saved on the control to the custom position.
Illustration 36 g06228578
(9) Move control to the "1F-1R" position.
(10) The setting is now "1F-1R".
(11) Move control to the "Custom" position.
(12) The setting is now "2F-3R".Display menu
Illustration 37 g03781066This menu allows the operator to configure the display by changing the units used, the brightness of the digital display window or the language. Brightness can be adjusted on a scale from 0 to 100%.To select a language, operator should scroll until the desired language is highlighted. Then, validate the selection with the OK button. Consult your Cat dealer if the desired language is not available.Units can be chosen between "English and Metric". This setting will be used for all the different screens displayed by the digital display window."TOTALS" Menu
Illustration 38 g03646973With this menu, the operator can check operating hours, distance traveled and fuel usage. Trip totals can be reset at any time with the sub menu Reset Totals. Lifetime Totals will summarize the same information over the entire machine life."SERVICE" Menu
Illustration 39 g03781068This menu allows the operator to check machine conditions and access to specific settings.Diagnostics
Illustration 40 g03647003The diagnostics menu will display the events and fault codes recorded. For each event or fault code, the system will show the description, the number of occurrences and the service meter hours of the first and the last occurrence. Press the "OK" button to go through those screens.
Illustration 41 g03647008Parameters
Illustration 42 g03647089The Parameters menu will display the value of several sensors. This menu may be useful for troubleshooting purpose. Scroll down to navigate through the different systems monitored.ECM Summary
Illustration 43 g03647094The ECM menu will display information for each ECM installed on the machine (software, ECM P/N)Example:
Illustration 44 g03647097
This menu will allow the access to the service configuration menu. The menu is protected by a password. Consult your Cat dealer to get the password.Service ConfigService configuration menu will appear only if the operator enters the Service mode password through the Service mode menu. Service configuration allows the access to advanced settings:
- Parking Brake Lockout : allow to lock the brakes for testing (locked or not locked)
- Ripper installation status : allow to active the ripper function (Installed or Not Installed )
AccuGrade Installation: allow to install the Accugrade SystemEvent and Fault Code Popups
During machine operation, if a problem is detected on the machine, a popup message may appear on the digital display window. The message displayed will have the following format:
Illustration 45 g06141852
Popup message

Parts chain Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.