3561944 CHAIN Caterpillar parts
RM-500
Rating:
Alternative (cross code) number:
CA3561944
356-1944
3561944
CA3561944
356-1944
3561944
Weight: 272 pounds 123 kg.
RECLAIMER MIXER,
Compatible equipment models: 3561944:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0306 Vacuum Transducer 1
ZZ 6V-9831 Cap As 3
6V-9510 Face Seal Plug 3
6V-9832 Cap As 1
6V-9511 Face Seal Plug 1
6V-9509 Face Seal Plug 1
6V-9830 Cap As 1
6V-9508 Face Seal Plug 2
6V-9829 Cap As 2 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hose assemblies for installation purposes. Plug all of the hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00944947
Remove the cap from the hydraulic tank. Attach Tooling (A) to the hydraulic tank. Note: Hook up the air to Tooling (A) in order to create a vacuum in the hydraulic system. This will minimize the leakage from the hose assemblies.
Illustration 2 g00989637
Remove bolts (1) and panel (2). Remove bolts (3) and remove panels (4) and (5). Note: Clean the swing motor, and clean the area around the swing motor prior to removing the swing motor.
Illustration 3 g00989639
Disconnect hose assemblies (6).
Illustration 4 g00989644
Illustration 5 g00989645
Remove bolts (7) and remove panel (8). Disconnect hose assemblies (9).
Drain the lubricant from the swing drive into a suitable container for storage or for disposal. The capacity of the swing drive is approximately 3 L (0.8 US gal).
Illustration 6 g00989651
Remove bolts (10). Attach a suitable lifting device onto swing motor (11). The weight of swing motor (11) is approximately 43 kg (94 lb). Remove swing motor (11).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0306 Vacuum Transducer 1
ZZ 6V-9831 Cap As 3
6V-9510 Face Seal Plug 3
6V-9832 Cap As 1
6V-9511 Face Seal Plug 1
6V-9509 Face Seal Plug 1
6V-9830 Cap As 1
6V-9508 Face Seal Plug 2
6V-9829 Cap As 2 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hose assemblies for installation purposes. Plug all of the hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00944947
Remove the cap from the hydraulic tank. Attach Tooling (A) to the hydraulic tank. Note: Hook up the air to Tooling (A) in order to create a vacuum in the hydraulic system. This will minimize the leakage from the hose assemblies.
Illustration 2 g00989637
Remove bolts (1) and panel (2). Remove bolts (3) and remove panels (4) and (5). Note: Clean the swing motor, and clean the area around the swing motor prior to removing the swing motor.
Illustration 3 g00989639
Disconnect hose assemblies (6).
Illustration 4 g00989644
Illustration 5 g00989645
Remove bolts (7) and remove panel (8). Disconnect hose assemblies (9).
Drain the lubricant from the swing drive into a suitable container for storage or for disposal. The capacity of the swing drive is approximately 3 L (0.8 US gal).
Illustration 6 g00989651
Remove bolts (10). Attach a suitable lifting device onto swing motor (11). The weight of swing motor (11) is approximately 43 kg (94 lb). Remove swing motor (11).
Caterpillar parts catalog:
Parts chain Caterpillar catalog:
1G9089
CHAIN
30/30, AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, CB-54, CB-64, CP-433E, CP-533E, CS-423E, CS-433E, CS-533E, DEUCE, PM-...
30/30, AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, CB-54, CB-64, CP-433E, CP-533E, CS-423E, CS-433E, CS-533E, DEUCE, PM-...
1982654
CHAIN
AP-1000, AP-1000B, AP-1050, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E...
AP-1000, AP-1000B, AP-1050, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E...
0543430
CHAIN AS
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
1950993
CHAIN
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
3410971
CHAIN
CB-14, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
CB-14, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
1950993
CHAIN
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
0543430
CHAIN AS
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
1940884
CHAIN-ROLLER
AP-655C
AP-655C
0813135
CHAIN
CB-214B, CB-214D, CB-214E, CB-22, PS-500
CB-214B, CB-214D, CB-214E, CB-22, PS-500
1951411
CHAIN
CB-534D, CB-54, CB-564D, CB-64, CP-433E, CP-44, CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-423E, CS-433E, CS-44, CS-531D, CS-533D, CS-533E, CS-54, CS-54B, CS-56, CS-563...
CB-534D, CB-54, CB-564D, CB-64, CP-433E, CP-44, CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-423E, CS-433E, CS-44, CS-531D, CS-533D, CS-533E, CS-54, CS-54B, CS-56, CS-563...
3510194
CHAIN GP
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
2587183
CHAIN
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
2422776
CHAIN
AP-600D, AP-655D, AS4251C
AP-600D, AP-655D, AS4251C
3506026
CHAIN GP
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
3561943
CHAIN
RM-300
RM-300
3514461
CHAIN GP-CONVEYOR
AP-1000B, BG-260D
AP-1000B, BG-260D