2P0483 CHAMBER ASSEM. Caterpillar parts
D342, D8H
Rating:
Alternative (cross code) number:
CA2P0483
2P-0483
2P0483
CA2P0483
2P-0483
2P0483
Weight: 4 pounds 1 kg.
MARINE ENGINE, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Pre Combustion Chamber 2P0483 Fits Caterpillar D342 D342C D8H
Generic Package included: 1x Pre Combustion Chamber 2P0483 Fits Caterpillar D342 D342C D8H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x Pre Combustion Chamber 2P0483 Fits Caterpillar D342 D342C D8H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Replacement for fits Fits 2P0483 Combustion Chamber Assembly Fits Caterpillar D8H D339 D342
Morricho
Morricho
Number on catalog scheme:
None
For full view, you need register
Information:
The engine is shipped with an engine oil level gauge that is not marked. The engine oil level gauge is not marked because the following features can be different for each engine:
Angle of the installation
Side for serviceThe engine oil level gauge must be calibrated after the engine is installed in the vessel.Note: The engine may be equipped with auxiliary engine oil filters. The extra filters require more engine oil than the standard amounts. Refer to the OEM specifications.Use the following procedure to calibrate and mark the engine oil level gauge.
Ensure that the engine is properly aligned and that the engine is in the design trim. The engine must be installed properly in the vessel.Note: If the engine has oil in the crankcase, skip step 2 and proceed to step 3.
If there is no oil in the engine, use information in this Operation and Maintenance Manual, "Fluid Recommendations" to select the correct oil for the engine. Add engine oil to the crankcase by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change". Choose the appropriate amount of oil from the following type of sump:
Fill the crankcase with 110 L (116 qt) of the recommended oil if the oil filters were changed. If the filters were not changed, subtract 2 L (2.1 qt) of oil from the total for each filter.Clean the engine oil level gauge and install the engine oil level gauge.Note: If the engine contains oil, perform steps 3 through 6. Skip steps 3 through 6 if you are filling the engine with oil for the first time.
Operate the engine until normal operating temperature is achieved. Stop the engine. Drain the engine oil by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Replace the engine oil filter by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Clean the engine oil level gauge and install the engine oil level gauge.
Add engine oil to the crankcase by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change". Choose the appropriate amount of oil from the following sump:
Deep Oil Sump: Fill the crankcase with 110 L (116 qt) of the recommended oil if the oil filters were changed. If the filters were not changed, subtract 2 L (2.1 qt) of oil from the total for each filter.
Start the engine. Ensure that the lubrication system and the new engine oil filter are filled. Inspect the lubrication system for leaks.
Stop the engine and allow the engine oil to drain into the engine crankcase for approximately
Angle of the installation
Side for serviceThe engine oil level gauge must be calibrated after the engine is installed in the vessel.Note: The engine may be equipped with auxiliary engine oil filters. The extra filters require more engine oil than the standard amounts. Refer to the OEM specifications.Use the following procedure to calibrate and mark the engine oil level gauge.
Ensure that the engine is properly aligned and that the engine is in the design trim. The engine must be installed properly in the vessel.Note: If the engine has oil in the crankcase, skip step 2 and proceed to step 3.
If there is no oil in the engine, use information in this Operation and Maintenance Manual, "Fluid Recommendations" to select the correct oil for the engine. Add engine oil to the crankcase by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change". Choose the appropriate amount of oil from the following type of sump:
Fill the crankcase with 110 L (116 qt) of the recommended oil if the oil filters were changed. If the filters were not changed, subtract 2 L (2.1 qt) of oil from the total for each filter.Clean the engine oil level gauge and install the engine oil level gauge.Note: If the engine contains oil, perform steps 3 through 6. Skip steps 3 through 6 if you are filling the engine with oil for the first time.
Operate the engine until normal operating temperature is achieved. Stop the engine. Drain the engine oil by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Replace the engine oil filter by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Clean the engine oil level gauge and install the engine oil level gauge.
Add engine oil to the crankcase by using the procedure in this Operation and Maintenance Manual, "Engine Oil and Filter - Change". Choose the appropriate amount of oil from the following sump:
Deep Oil Sump: Fill the crankcase with 110 L (116 qt) of the recommended oil if the oil filters were changed. If the filters were not changed, subtract 2 L (2.1 qt) of oil from the total for each filter.
Start the engine. Ensure that the lubrication system and the new engine oil filter are filled. Inspect the lubrication system for leaks.
Stop the engine and allow the engine oil to drain into the engine crankcase for approximately
Caterpillar parts catalog:
Parts chamber Caterpillar catalog:
1H9570
CHAMBER
3406B, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C32, D342, D348, D353C, D364, D379A, D398A, G3508, G3508B, G3512, G3512B, G3516, G3516B, G352...
3406B, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C32, D342, D348, D353C, D364, D379A, D398A, G3508, G3508B, G3512, G3512B, G3516, G3516B, G352...
D342, D342C, D8H
D342, D342C, D8H, D8K
1L8014
CHAMBER
D326F, D337F, D342, G342C
D326F, D337F, D342, G342C
D342, D342C
D342, D342C, D8H
5L6940
CHAMBER ASSEM.
D342C, D8H
D342C, D8H
2N0855
CHAMBER
D348
D348
16, 641, 666, 834, D343
D342, D342C, D8H
16, 1693, 631C, 651, 657, 657B, 666, 768B, 769, 824B, 825B, 826B, 834, 983, 988, D343
1693, 769, D343
2S0380
CHAMBER ASSEM.
16, 824, 988, D343
16, 824, 988, D343
D330A, D330B, D333B
7L4093
CHAMBER ASSEM.
D333B
D333B
9L2682
CHAMBER ASSEM.
1673, 1673B, D333A, D333B
1673, 1673B, D333A, D333B
120G, 130G, 140B, 14G, 1673C, 225, 3304, 3306, 528, 814, 950, 955K, 955L, 966C, 977K, 977L, 980B, D6C, D6D, D7F, D7G
594, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, D9G
D342, D342C, D8H, D8K