CHAMBER AS-BRAKE 3Y3501 - Caterpillar

(1) Make stake marks near opening of each pin (1) hole after installation, as indicated by dimension "D" ... 1.50 mm (.059 in).(3) Apply 5P-3413 Sealant on the inner surface of cage where seal (3) goes. Lubricate the seal lip with a small amount of grease. Apply 1U-8846 Gasket Maker on mating surfaces of cage and housing.(4) Apply 9S-3263 Thread Lock on threads of 16 bolts ... 270 plusmn; 40 N m (200 30 lb ft).(5) Apply 1U-8846 Gasket Maker on mating surfaces of cover, ring gear, housing and cage.(6) Apply 9S-3263 Thread Lock on threads of bolt and torque the bolt to ... 180 25 N m (135 18 lb ft)(7) Bend washer against the flat of bolt (6) head. Use care not to damage the retainer (8) surface.(9) Use shim(s) as required, tp get a clearance of 0.05 to 0.03 mm (0.002 to ..012 in) between retainer (8) and the coupling.Thickness of one shim; 7Y-1620 ... 0.80 mm (.031 in)7Y-1621 ... 0.16 mm (.006 in)7Y-1622 ... 0.10 mm (.004 in)(10) Apply 5P-3931 Anti-Seize Compound on the inner surface of housing in which the bearing fit.(12) Apply 5P-3931 Anti-Seize Compound to bores of dowels (3) before assembly.(13) Apply 9S-3263 Thread Lock on threads of eight bolts.