CHANNEL 0323096 - Caterpillar

Illustration 4 g00643419
Remove handle (9) .
Remove four screws (10) and cover (11) .
Illustration 5 g00644325
Remove horn switch (12) .
Illustration 6 g00644473
Disconnect wire (13) .
Illustration 7 g00644485
Remove bolt (14). Bolt (14) secures the steering wheel.Note: Put identification marks on steering wheel (15) and the shaft. The marks will assist in proper alignment during installation.
Illustration 8 g00644545
Install Tooling (A). Remove steering wheel (15) .
Illustration 9 g00644602
Loosen two screws (16) and (17) .
Disconnect two electrical connectors (18) and (19) .
Illustration 10 g00644625
Disconnect electrical connector (20) .
Illustration 11 g00644643
Remove nine screws (21). Remove panel (22) .
Illustration 12 g00644688
Disconnect electrical wire (23) .
Illustration 13 g00644712
Remove four bolts (24) and the washers.
Illustration 14 g00644770
Remove bolt (25) and the washer from the left side.
Illustration 15 g00644774
Remove bolt (26) and the washer from the right side.
Illustration 16 g00644780
Remove two screws (27). Remove cover (28) .
Illustration 17 g00644801
Remove nut (29) and the washer. Remove the linkage from the wiper motor.
Remove three bolts (30) and the washers.
Remove window wiper motor (31) .
Illustration 18 g00644817
Remove two nuts (32).
Remove linkage (33). Note: Linkage (33) does not require removal in order to remove the window wiper motor. Check the linkage for wear.