CHANNEL 0534142 - Caterpillar

Illustration 1 g03880361
Typical example
Table 1
Specification for 361-8030 Brake and Planetary Gp, 370-5675 Brake and Planetary Gp, 370-5679 Brake and Planetary Gp, 370-5680 Brake and Planetary Gp, and 388-1434 Brake and Planetary Gp
Item Qty Part Specification Description
1 Thickness of two new friction discs and one new reaction plate is 18.90 0.34 mm (0.744 0.013 inch):
2 375-0273 Friction Disc Thickness of one new friction disc is 5.41 0.13 mm (0.213 0.005 inch).
1 130-5866 Reaction Plate Thickness of one new plate is 8.08 0.28 mm (0.318 0.011 inch).
2 8 293-4400 Thrust Washer Thickness is 3.0 0.2 mm (0.12 0.01 inch).
C 4 361-8065 Shaft Diameter is 59.380 0.010 mm (2.3378 0.0004 inch).
D 4 361-8085 Planetary Gear Bore is 75.000 0.013 mm (2.9528 0.0005 inch).
G - - Installation depth of the spring pin is 20.0 1.0 mm (0.79 0.04 inch).
3 4 361-8066 Bushing Outside diameter is 74.885 0.013 mm (2.9482 0.0005 inch).
Thickness is 7.720 0.013 mm (0.3039 0.0005 inch).
4 1 117-1801 Dowel Before assembly, apply green Loctite 620 to the outside diameter of the dowel. Assemble the dowel against the bottom of the dowel hole.
5 1 149-9113 Dowel Before assembly, apply green Loctite 620 to the outside diameter of the hollow dowel. Assemble the dowel against the bottom of the dowel hole.
6 3 163-8781 Spring Length under test force is 48.9 mm (1.93 inch).
Test force is 650 33 N (146 7 lb).
Free length after test 64.02 mm (2.520 inch).
7 1 150-4651 O-Ring Seal Lubricate bore of the O-ring seal and full length of the pin (8) heavily with the oil that is being sealed.
8 1 149-9114 Pin
9 1 287-7340 Plug Torque to 60 6 N m (44 4 lb ft).
10 4 8T-2925 Spring Pin The openings of the spring pins (10) and the spring pins (11) must be 180 degrees away from each other. The openings of the spring pins (10) and the spring pins (11) must be parallel to the deck plane of the planetary carrier.
Install to depth as shown.
11 4 138-1645 Spring Pin
12 2 9N-5495 Spring Length under test force is 42.47 mm (1.672 inch).
Test force is 91.0 9.1 N (20.5 2.0 lb).
Free length after test 48.77 mm (1.920 inch).