CHANNEL ASSEM. 1V5398 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-7030     Micrometer Depth Gauge Group     1    
Illustration 1 g01457691
Install hub (9) on piston pump (2). Use Tooling (A) and set Dimension (X) to a distance of 2 mm (0.080 inch).
Tighten bolt (10) to a torque of 48 2 N m (35 1 lb ft).
Illustration 2 g01457562
Use two people and install piston pump (2). The weight of piston pump (2) is approximately 23 kg (50 lb). Install bolts (8) .
Illustration 3 g01457560
Connect hose assembly (6) and hose assembly (7) to piston pump (2) .
Illustration 4 g01457559
Connect hose assemblies (5) .
Connect harness assembly (4) .
Illustration 5 g01457558
Connect hose assemblies (3) to piston pump (2) .
Illustration 6 g01457555
Connect hose assemblies (1) .
Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure.
Turn the disconnect switch to the ON position.
Close the engine enclosure.