CHANNEL AS 4778300 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Use Tooling (A) in order to remove the fuel filter.
Illustration 1 g01087789
Disconnect tube assembly (1) and tube assembly (2). Immediately cap all openings or plug all openings in order to prevent contamination.
Remove the bolts (not shown) and remove fuel filter base (3) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01087789
Position fuel filter base (3) on the mounting bracket. Install the bolts (not shown).
Connect tube assembly (1) and tube assembly (2) .
Install the fuel filter.