CHANNEL 4Q0012 - Caterpillar

Illustration 1 g01520147
Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame and the cylinder pin bores.Note: Make sure that the sleeve bearing (1) is installed in the bore so that the part number of the bearing is facing outward. (1) 269-9384 Sleeve Bearing Quantity ... 2 Inside diameter ... 110.30 0.04 mm (4.343 0.002 inch) Outside diameter ... 130.240 0.013 mm (5.1275 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch) (2) 205-4338 Pin As Pin diameter ... 99.85 0.04 mm (3.931 0.002 inch) Bore diameter for the pin assembly ... 100.043 0.043 mm (3.9387 0.0017 inch) (3) 205-4667 Pin Pin diameter ... 99.85 0.04 mm (3.931 0.002 inch) Bore diameter for the pin ... 100.043 0.043 mm (3.9387 0.0017 inch) (4) 205-4668 Pin Pin diameter ... 99.85 0.04 mm (3.931 0.002 inch) Bore diameter for the pin ... 100.043 0.043 mm (3.9387 0.0017 inch) (5) As required, use the following shims to adjust the maximum lateral clearance to 1.0 to 2.0 mm (0.04 to 0.08 inch). 093-0090 Shim Quantity ... 3 Thickness of one shim ... 1.0 mm (0.04 inch) 7Y-3355 Shim Quantity ... 3 Thickness of one shim ... 1.6 mm (0.06 inch) 093-0122 Shim Quantity ... 3 Thickness of one shim ... 2.0 mm (0.08 inch) (6) Lubricate the sealing lip of two lip type seals lightly with the lubricant that is being sealed.